IC-Hersteller ROHM

IC-Hersteller (103)

ROHM BM2P0161-Z | Demoboard BM2P0161-EVK-004

Flyback Type PWM Mode Isolated 13.5 V 1.3 A Non-Isolated 20 V 0.1 A

Details

TopologieSperrwandler
Eingangsspannung90-264 V
Ausgang 114.04 V / 1.3 A
IC-Revision001

Beschreibung

The PWM type DC/DC converter for AC/DC provides an optimal system for all products that require an electrical outlet. BM2P0161-Z supports both isolated and non-isolated devices, enabling simpler design of various types of low power consumption electrical converters. The built-in 650 V starter circuit contributes to low-power consumption. Power supply can be designed flexibly by connecting current sensing resistor for the switching externally. Current is restricted in each cycle and excellent performance is demonstrated in bandwidth and transient response since current mode control is utilized. The switching frequency is 65 kHz. At light load, the switching frequency is reduced and high efficiency is achieved. A frequency hopping function that contributes to low EMI is also included on chip. Design can be easily implemented because includes a 650 V switching MOSFET.

Eigenschaften

  • PWM Frequency: 65kHz
  • PWM Current Mode Control
  • Built-in Frequency Hopping Function
  • Burst Operation When Load is Light
  • Frequency Reduction Function
  • Built-in730VStarter Circuit
  • Built-in730VSwitching MOSFET
  • VCC Pin Under-Voltage Protection
  • VCC Pin Over-Voltage Protection
  • SOURCE PinOpen Protection
  • SOURCE Pin Short Protection
  • SOURCE PinLeading Edge Blanking Function
  • Per-Cycle Over-Current Protection Circuit
  • Over Current Protection AC Voltage Compensation Circuit
  • Soft Start
  • Secondary Over-Current Protection Circuit

Typische Anwendungen

  • AirConditioner, ACAdapters, EachHousehold Applications and Power Supplies for Motor

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
C
VR(V (AC))
Sicherheitsklasse
dV/dt(V/µs)
DF @ 1 kHz(%)
RISO
Raster(mm)
L(mm)
B(mm)
H(mm)
Verpackung
Endurance(h)
IRIPPLE(mA)
ILeak(µA)
DF(%)
Ø D(mm)
Muster
WCAP-FTX2 Folienkondensatoren, Across the mains, 100 nF
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität100 nF
Nennspannung275 V (AC)
SicherheitsklasseX2 
Spannungsanstiegsgeschwindigkeit300 V/µs
Verlustfaktor0.1 %
Isolationswiderstand30 GΩ
Raster10 mm
Länge13 mm
Breite7 mm
Höhe13 mm
VerpackungKarton 
WCAP-ATLI Aluminium-Elektrolytkondensatoren, –, 100 µF
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität100 µF
Nennspannung50 V (AC)
Raster3.5 mm
Länge11.5 mm
VerpackungAmmopack 
Endurance 3000
Rippelstrom730 mA
Leckstrom50 µA
Verlustfaktor8 %
Durchmesser8 mm
WCAP-ATLI Aluminium-Elektrolytkondensatoren, –, 680 µF
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität680 µF
Nennspannung35 V (AC)
Raster5 mm
Länge20 mm
VerpackungAmmopack 
Endurance 5000
Rippelstrom2260 mA
Leckstrom238 µA
Verlustfaktor9 %
Durchmesser13 mm
WCAP-ATLL Aluminium-Elektrolytkondensatoren, –, 10 µF
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität10 µF
Nennspannung50 V (AC)
Raster2 mm
Länge11 mm
VerpackungAmmopack 
Endurance 4000
Rippelstrom120 mA
Leckstrom5 µA
Verlustfaktor10 %
Durchmesser5 mm