Richtek RTQ2130B | Demoboard EVB_RTQ2130BGQW-QT

Beschreibung

The Evaluation Board demonstrates the RTQ2130B to be designed for a 5V/0.7A output from a 7V to 25V input at 2.1MHz switching frequency. The RTQ2130B can apply to other output voltages by changing the resistive divider for input voltages support up to 36V. For more application circuits, please refer to the RTQ2130B datasheet. The wide input range makes it suitable for automotive systems and car camera module. The RTQ2130B provides complete protection functions such as input under voltage lockout, output undervoltage protection, overcurrent protection, and thermal shutdown. Cycle-by-cycle current limit provides protection against shorted outputs and soft-start eliminates input current surge during start-up.

Eigenschaften

• AEC-Q100 Grade 1 Qualified
• Wide Input Voltage Range
• 4V to 36V
• 3V to 36V (soft-start is finished)
• Tight Switching Frequency Variation 2.1MHz ±10% Over Operating Ambient Temperature
• 5V Fixed Output Voltage (see Ordering Information for availability)
• Maximum Output Current : 0.7A
• Peak Current Mode Control
• Integrated 200mΩ Switch and 160mΩ Synchronous Rectifier
• Enable Control
• 0.8V ±1.5% Reference Voltage Accuracy
• Adjacent Pin-Short Protection
• Built-In UVLO, UVP, OTP
• Junction Temperature Range : −40°C to 150°C

Typische Anwendungen

• Automotive Systems, Car Camera Module and Car Cockpit Systems, Connected Car Systems
• Digital Set Top Boxes, Broadband Communications
• Point of Load Regulator in Distributed Power Systems

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers