IC-Hersteller Qorvo

IC-Hersteller (96)

Qorvo ACT5101 | Demoboard ACT5101EVK1-102-UG127

Details

TopologieAbwärts- und Aufwärtswandler
Eingangsspannung4-22 V
Ausgang 120 V / 5 A
IC-Revision02

Beschreibung

Qorvo's ACT5101 is a buck-boost converter with 4 integrated MOSFETs. It offers a high efficiency, low component count, compact solution with a wide input voltage range for 4 to 23 V applications.An advanced switch control algorithm allows the buck-boost converter to maintain output voltage regulation with input voltages that are above, below or equal to the output voltage. The system can be monitored and configured by I2C interface as well.The built-in ADC can be read for the information of input/output voltages and currents, die temperature and generic input signals.

Eigenschaften

  • Buck-boost converter with 4 integrated switches
  • Wide input voltage range: 4 to 23 V (no dead zone)
  • 3 to 23 V wide output voltage range
  • Supports programmable power supply (PPS)
  • 2 V ~ 5 V / 100 mA programmable output LDO
  • Voltage and current monitoring
  • Thermal regulation and protection
  • Enable pin for power on/off control
  • Programmable via I2C: Output voltage, current and soft-start

Typische Anwendungen

  • Car Chargers, Docking Stations, Solid-State Lighting
  • Multiple Power Source Supplies, DC UPS Units, Solar Powered Devices

Weiterführende Informationen

Artikeldaten

Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieAnwendungPCB/Kabel/PanelModularityWire SectionλDom typ.
(nm)
FarbeλPeak typ.
(nm)
IV typ.
(mcd)
VF typ.
(V)
Chiptechnologie50% typ.
(°)
CTol. CVR
(V (DC))
BauformBetriebstemperaturDF
(%)
RISOKeramiktypL
(mm)
W
(mm)
Fl
(mm)
L
(µH)
IRP,40K
(A)
ISAT,30%
(A)
RDC
(mΩ)
fres
(MHz)
MontageartEndurance
(h)
BetriebstemperaturIRIPPLE
(mA)
ILeak
(µA)
Raster
(mm)
Ø D
(mm)
Z
(mΩ)
PinsReihenH
(mm)
GenderTypIR
(A)
Verpackung Muster
691214110002SSPEC
6 Dateien WR-TBL Series 2141S - 3.50 mm Horizontal Entry Modular w. Rising Cage Clamp Rising Cage Clamp PCB Ja 30 to 16 (AWG) 0.05 to 1.31 (mm²) -30 °C up to +120 °C 7 THT -30 °C bis zu +120 °C 3.5 2 Horizontal 10 Karton
150060BS75000SPEC
25 Dateien WL-SMCW SMT Mono-color Chip LED Waterclear 470 Blau 465 145 3.2 InGaN 140 0603 -40 °C up to +85 °C 1.6 0.8 SMT -40 °C up to +85 °C 0.7 Tape and Reel
860010473011SPEC
7 Dateien WCAP-ATG8 Aluminium-Elektrolytkondensatoren220 µF ±20% 25 14 11 2000 -40 °C bis zu +85 °C 310 55 2.5 6.3 Ammopack
865080445010SPEC
8 Dateien WCAP-ASLI Aluminium-Elektrolytkondensatoren100 µF ±20% 25 6.3 x 7.7 -55 °C up to +105 °C 141 MΩ 7.7 6.6 V-Chip SMT 2000 -55 °C bis zu +105 °C 290 25 6.3 380 15" Tape & Reel
885012206026SPEC
8 Dateien WCAP-CSGP MLCCs 10 V(DC)1 µF ±10% 10 0603 -55 °C up to +125 °C 100.1 GΩ X7R Klasse II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012206061SPEC
8 Dateien WCAP-CSGP MLCCs 25 V(DC)2.2 nF ±10% 25 0603 -55 °C up to +125 °C 3.510 GΩ X7R Klasse II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012206067SPEC
8 Dateien WCAP-CSGP MLCCs 25 V(DC)22 nF ±10% 25 0603 -55 °C up to +125 °C 3.510 GΩ X7R Klasse II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012206093SPEC
8 Dateien WCAP-CSGP MLCCs 50 V(DC)47 nF ±10% 50 0603 -55 °C up to +125 °C 310 GΩ X7R Klasse II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012206095SPEC
8 Dateien WCAP-CSGP MLCCs 50 V(DC)100 nF ±10% 50 0603 -55 °C up to +125 °C 35 GΩ X7R Klasse II 1.6 0.8 0.4 0.8 7" Tape & Reel
61300111121SPEC
6 Dateien WR-PHD 2.54 mm THT Pin Header -40 °C up to +105 °C1000 MΩ 2.54 THT 2.54 1 Single Pin Header Gerade 3 Beutel
61300211121SPEC
6 Dateien WR-PHD 2.54 mm THT Pin Header -40 °C up to +105 °C1000 MΩ 5.08 THT 2.54 2 Single Pin Header Gerade 3 Beutel
61300311121SPEC
6 Dateien WR-PHD 2.54 mm THT Pin Header -40 °C up to +105 °C1000 MΩ 7.62 THT 2.54 3 Single Pin Header Gerade 3 Beutel
74439346100SPEC
8 Dateien WE-XHMI SMT Speicherdrossel 6060 -40 °C up to +125 °C 6.65 6.45 10 6.4 9.7 26.5 18 SMT -40 °C bis zu +125 °C 2 6.1 5
Muster
Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieAnwendungPCB/Kabel/PanelModularityWire SectionλDom typ.
(nm)
FarbeλPeak typ.
(nm)
IV typ.
(mcd)
VF typ.
(V)
Chiptechnologie50% typ.
(°)
CTol. CVR
(V (DC))
BauformBetriebstemperaturDF
(%)
RISOKeramiktypL
(mm)
W
(mm)
Fl
(mm)
L
(µH)
IRP,40K
(A)
ISAT,30%
(A)
RDC
(mΩ)
fres
(MHz)
MontageartEndurance
(h)
BetriebstemperaturIRIPPLE
(mA)
ILeak
(µA)
Raster
(mm)
Ø D
(mm)
Z
(mΩ)
PinsReihenH
(mm)
GenderTypIR
(A)
Verpackung Muster