IC-Hersteller Qorvo

IC-Hersteller (103)

Qorvo ACT4911 | Demoboard UG-107

ACT4911EVK1-301 User’s Guide

Details

TopologieSonstige Topologie
Eingangsspannung3.3 V
Ausgang 12 A
IC-Revision1.0

Beschreibung

The ACT4911 device is a highly integrated power loss protection IC. It provides backup storage power in the event of an input power failure. A built-in boost converter provides high voltage energy storage to minimize storage capacitor size equirements. The built-in buck converter regulates the storage voltage to a fixed output voltage. It contains internal, back-toback eFuse FETs to provide bi-directional input to output isolation. The IC also provides hot swap and inrush current control. The ACT4911 is very flexible and can easily be configured with I2C and external components. It features programmable storage capacitor voltage to optimize the storage capacitor sizing and system run time. The internal ADC and health monitoring provide an extra layer of protection and improve system reliability and early capacitor failure notification. It automatically checks the storage capacitor health and notifies the user when the energy in the storage caps is not sufficient for backup power. The ADC also measures the input voltage, output voltage, storage voltage, eFuse current, and die temperature. The builtin synchronous buck converter maximizes energy transfer from the storage caps to the system. ACT4911 provides an I2C bus interface to allow MCU control and monitoring. There are supervisor monitors for the input voltage, output voltage, and storage voltage. It is available with the thermal enhanced QFN5x5 28 pins package.

Eigenschaften

  • Wide 2.7-to-8V Operating Input Range
  • 10V Max Input Blocking Voltage
  • Adjustable Bus Voltage Start-Up Slew Rate for InrushCurrent Control
  • Configurable Input power Failure Level
  • Programmable up to 10A Input Current Limit
  • Programmable 5V to 36V Boost Storage Voltage
  • 36V@6A Synchronous Buck Supports 100% DutyCycle
  • Programmable up to 1.13MHz Buck Operating Frequencyfor Small Inductor Size
  • Undetectable Transition from Input Supply to CapacitorBank Power
  • Compatible with Different Types of Storage Caps:Super Caps, Electrolytic, Tantalum, POSCAP
  • ADC Monitoring of Critical Signals
  • Autonomous Health Monitoring for Detection of Earlier Storage Capacitor Failures
  • Configurable Interrupts to Inform Host for any\
  • Faults/Status Change
  • eFuse, Boost, and Buck UV/OV/OC Protection
  • Thermal Alert and Protection
  • Thermal Enhanced FCQFN 5×5-28 package

Typische Anwendungen

  • Solid State Drive/ Hot Plug Devices
  • Backup Power
  • Industrial Applications

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
Pins
PCB/Kabel/Panel
Modularity
Typ
Wire Section
λDom typ.(nm)
Farbe
λPeak typ.(nm)
IV typ.(mcd)
VF typ.(V)
Chiptechnologie
50% typ.(°)
L(µH)
IRP,40K(A)
ISAT,30%(A)
RDC typ.(mΩ)
fres(MHz)
VOP(V)
Montageart
L(mm)
H(mm)
IR(A)
Arbeitsspannung(V (AC))
Betriebstemperatur
Muster
WR-TBL Series 213 - 5.00 mm Horiz.l Entry Modular, 2, Käfigzugklemme
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins
PCB/Kabel/PanelPCB 
ModularityJa 
TypHorizontal 
Wire Section 26 to 16 (AWG) 0.5 to 1.5 (mm²)
MontageartTHT 
Länge10 mm
Nennstrom10 A
Arbeitsspannung250 V (AC)
Betriebstemperatur -40 °C up to +105 °C
WR-PHD Stiftleisten - Einreihig, 2, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins
TypGerade 
MontageartTHT 
Länge5.08 mm
Nennstrom3 A
Arbeitsspannung250 V (AC)
Betriebstemperatur -40 °C up to +105 °C
WE-MAPI SMT-Speicherdrossel, 2, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins
Induktivität2.2 µH
Performance Nennstrom7.1 A
Sättigungsstrom @ 30%9.2 A
Gleichstromwiderstand22 mΩ
Eigenresonanzfrequenz35 MHz
Betriebsspannung80 V
MontageartSMT 
Länge4.3 mm
Höhe3.1 mm
Nennstrom5.2 A
Betriebstemperatur -40 °C up to +125 °C
WR-PHD Stiftleisten - Einreihig, 4, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins
TypGerade 
MontageartTHT 
Länge10.16 mm
Nennstrom3 A
Arbeitsspannung250 V (AC)
Betriebstemperatur -40 °C up to +105 °C
WL-SMCW SMT Mono-color Chip LED Waterclear, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
dominante Wellenlänge [typ.]570 nm
FarbeHellgrün 
Spitzen-Wellenlänge [typ.]572 nm
Lichtstärke [typ.]40 mcd
Durchlassspannung [typ.]2 V
ChiptechnologieAlInGaP 
Abstrahlwinkel Phi 0° [typ.]140 °
MontageartSMT 
Länge1.6 mm
Höhe0.7 mm
Betriebstemperatur -40 °C up to +85 °C