IC-Hersteller Qorvo

IC-Hersteller (96)

Qorvo ACT4751 | Demoboard ACT4751EVK1-101 User’s Guide

USB PD 3.0 Power IC with 40V Input Voltage, 4A, Programmable Output Voltage and Current

Details

TopologieAbwärtswandler
Eingangsspannung4-40 V
Schaltfrequenz450-2250 kHz
Ausgang 124 V / 4 A
IC-RevisionREF01

Beschreibung

The ACT4751 is a programmable DC-to-DC buck converter with bias supply rails for microcontrollers or USB PD controllers. It supports a wide input voltage of 4.5 V to 40 V and uses a synchronous step-down (buck) voltage regulator architecture. It integrates both the high side and low sideMOSFETS. These 50mΩ RDSON transistors enable high efficiency to reduce power losses.The ACT4751 main buck converter can be dynamically programed to an output voltage between 3 V and 24 V in 12.5 mV steps via the I2C or analog feedback. Also it can dynamically program output current between 0 A to 4 A in 256 steps via the I2C in a constant-current (CC) operation mode. The main-buck operates in a proprietary current modecontrol that supports external clock syncing for switching frequencies between 450 kHz and 2.25 MHz. The ACT4751 is a perfect solution for USB Power Delivery (PD) 3.0 and Programmable Power Supply (PPS) applications.The ACT4751 integrates a 5 V / 350 mA minibuck converter and a 20 mA AUX LDO to simplify application system designs. These rails can power up a controller and the 1.5W VCONN line in active USB-C cables.The ACT4751 is available in a 32-pin 5mm x 5mm QFN package with a power optimized footprint and exposed pad for improved thermal performance.

Eigenschaften

  • USB Certified Charger Design Available
  • 4.5 V to 40 V Operational Input Voltage
  • Programmable Output Voltage by I2C 3 V to 24 V in 12.5 mV Step
  • Programmable Output Current Limit 4 A in 256 Step Resolution
  • Fixed-Frequency Current-Mode Control from 450k to 2.25 MHz with External Clock Sync and 100% Duty Operation
  • Out of AM Radio / Spread-Spectrum Operation
  • 50 mΩ Integrated High-Side / Low-Side FETs
  • 5 V / 350 mA Bias Buck Converter
  • 20 mA AUX LDO, Programmable Output Voltage
  • I2C Interface, Fast-mode Plus (Fm+, 1 MHz) with Configurable Address
  • Protections:
    • UVLO, OVP, UVP (Hiccup/Latch-off), OCP, TSD
  • Thermally Enhanced 5 mm × 5 mm QFN Package

Typische Anwendungen

  • Industrial SMPS for 24V Bus
  • High Power LED Lighting
  • USB PD 3.0 Charging Hub / Power Management for All USB-C Power Rails

Weiterführende Informationen

Artikeldaten

Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieλDom typ.
(nm)
FarbeλPeak typ.
(nm)
IV typ.
(mcd)
VF typ.
(V)
Chiptechnologie50% typ.
(°)
CTol. CVR
(V (DC))
BauformBetriebstemperaturDF
(%)
RISOKeramiktypL
(mm)
W
(mm)
H
(mm)
Fl
(mm)
VerpackungL
(µH)
IR
(A)
ISAT
(A)
RDC
(mΩ)
fres
(MHz)
IRP,40K
(A)
ISAT,30%
(A)
MontageartAnwendungInterface typTypLeiterplattendicke
(mm)
GenderPinsIR 1
(A)
Arbeitsspannung
(V (DC))
Endurance
(h)
BetriebstemperaturIRIPPLE
(mA)
ILeak
(µA)
Raster
(mm)
Ø D
(mm)
RESR
(mΩ)
Muster
150060BS75000SPEC
25 Dateien WL-SMCW SMT Mono-color Chip LED Waterclear 470 Blau 465 145 3.2 InGaN 140 0603 -40 °C up to +85 °C 1.6 0.8 0.7 Tape and Reel SMT -40 °C up to +85 °C
74439358047SPEC
8 Dateien WE-XHMI SMT Speicherdrossel 8080 -40 °C up to +125 °C 8.8 8.3 8 4.7 9.5 8.65 22 13.35 16.65 SMT 2 -40 °C bis zu +125 °C
860010674014SPEC
7 Dateien WCAP-ATG8 Aluminium-Elektrolytkondensatoren100 µF ±20% 50 10 11.5 Ammopack 2000 -40 °C bis zu +85 °C 286 50 3.5 8
870055675009SPEC
7 Dateien WCAP-PTHR Aluminium-Polymer-Kondensatoren100 µF ±20% 35 12 12.5 Ammopack Radial THT 2000 -55 °C bis zu +105 °C 3700 700 5 10 25
885012210032SPEC
8 Dateien WCAP-CSGP MLCCs 50 V(DC)2.2 µF ±10% 50 1812 -55 °C up to +125 °C 2.50.2 GΩ X7R Klasse II 4.5 3.2 2.5 0.75 7" Tape & Reel
74404043470ASPEC
8 Dateien WE-LQS SMT-Speicherdrossel 4025 -40 °C up to +125 °C 4 4 2.5 47 0.71 0.45 492 15 SMT -40 °C bis zu +125 °C
632723100011SPEC
6 Dateien WR-COM USB 3.1 Type C Receptacle Horizontal THR / SMT -40 °C up to +105 °C1000 MΩ Tape and Reel 5 THR USB 3.1 Type C Horizontal 1 Receptacle 24 20
62900416021SPEC
7 Dateien WR-COM USB 2.0 Type A Horizontal SMT -40 °C up to +105 °C1000 MΩ Tray 1.5 SMT USB 2.0 Type A Horizontal Receptacle 4 1.5 30 -40 °C bis zu +105 °C
Muster
Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieλDom typ.
(nm)
FarbeλPeak typ.
(nm)
IV typ.
(mcd)
VF typ.
(V)
Chiptechnologie50% typ.
(°)
CTol. CVR
(V (DC))
BauformBetriebstemperaturDF
(%)
RISOKeramiktypL
(mm)
W
(mm)
H
(mm)
Fl
(mm)
VerpackungL
(µH)
IR
(A)
ISAT
(A)
RDC
(mΩ)
fres
(MHz)
IRP,40K
(A)
ISAT,30%
(A)
MontageartAnwendungInterface typTypLeiterplattendicke
(mm)
GenderPinsIR 1
(A)
Arbeitsspannung
(V (DC))
Endurance
(h)
BetriebstemperaturIRIPPLE
(mA)
ILeak
(µA)
Raster
(mm)
Ø D
(mm)
RESR
(mΩ)
Muster