Monolithic Power Systems MPQ7200A | Demoboard EVQ7200A-L-00B

Beschreibung

The EVQ7200A-L-00B is an evaluation board designed to demonstrate the capabilities of the MPQ7200A, a constant-current LED driver with integrated power MOSFETs. It offers a very compact solution to achieve 1.2A of continuous output current (IOUT), with excellent load and line regulation across a wide input supply range.Constant frequency hysteretic control mode provides extremely fast transient response without loop compensation. The switching frequency (fSW) is 410kHz in buck-boost mode for optimized efficiency and thermal performance.The MPQ7200A is available in a QFN-19 (3mmx4mm) package with wettable flanks,and is available in AEC-Q100 Grade 1.The EVQ7200A-L-00B is a fully assembled and tested buck-boost mode LED driver evaluation board. It generates an LED current up to 1.2A from a 6V to 20V input range.

Eigenschaften

• Built for a Wide Range of Automotive LED Applications:
• Wide 6V to 42V Operating Input Range
• PWM Dimming (Dimming Frequency from 100Hz to 2kHz)
• Internal 500Hz Two-Step Dimming with Configurable Duty Cycle
• Available in AEC-Q100 Grade 1
• High Performance for Improved
• Configurable LED Current without Sensing Resistor
• 44mΩ/40mΩ Low RDS(ON) Internal Power MOSFETs
• High-Efficiency Synchronous Mode
• Optimized for EMC/EMI:
• Default 410kHz Switching Frequency (fSW) with Spread Spectrum
• EMI Reduction Technique
• Full Protection Features:
• LED Short (to GND and Battery), LED Open, and Output OVP with Fault Indication
• OCP with Latch-Off Mode
• Configurable Thermal Derating
• Thermal Shutdown
• Fast Control Loop:
• Band-Band Control
• Configurable 1.2A in Buck-Boost Mode or 3A in Buck Mode
• 5% LED Current Accuracy from 700mA to 1.2A for Buck-Boost or 1A to 2A for Buck
• Available in a QFN-19 (3mmx4mm) Package with Wettable Flank

Typische Anwendungen

• Turn Indicator Lights, Daytime Running Lights (DRLs), Fog Lights, Rear Lights

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers