IC-Hersteller Monolithic Power Systems

IC-Hersteller (104)

Monolithic Power Systems MP2212DN | Demoboard EV2212DN-00A

16V, 3A, 600kHz Synchronous Step-Down Converter

Details

TopologieAbwärtswandler
Eingangsspannung3-16 V
Ausgang 11.8 V / 3 A
IC-Revision1.0

Beschreibung

The EV2212DN-00A is an evaluation board for the MP2212DN, a monolithic synchronous buck regulator. This EV board can deliver 3A continuous load current over an operating input voltage 3V to 16V. High efficiency power conversion is achieved through the use of synchronous rectification techniques. The output is adjustable over a range of 0.8V to 0.9xVIN by means of an external resistor from FB pin to ground.

Eigenschaften

3A Output Current

  • Input Supply Range: 3V to 16V
  • 80mΩ Internal Power MOSFET Switches
  • All Ceramic Output Capacitors Design
  • Up to 95% Efficiency
  • 600kHz Fixed Switching Frequency
  • Adjustable Output from 0.8V to 0.9xVIN
  • Internal Soft-Start
  • Frequency Synchronization Input
  • Thermal Shutdown
  • Cycle-by-Cycle Current Limiting
  • Hiccup Short Circuit Protection
  • 10-lead, 3mm x 3mm QFN Package and 8-lead SOICE package

Typische Anwendungen

  • Printers and LCD TVs
  • Network and Telecom Equipment
  • μP/ASIC/DSP/FPGA Core and I/O Supplies
  • Point of Load Regulators

Weiterführende Informationen

Artikeldaten

Jetzt einloggen, um Verfügbarkeiten zu sehen und Verfügbarkeitsprognosen anzufragen. LOGIN
Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
L(µH)
IRP,40K(A)
ISAT,10%(A)
ISAT,30%(A)
RDC(mΩ)
fres(MHz)
Material
VPE
MusterVerfügbarkeit & Muster
Jetzt einloggen, um Verfügbarkeiten zu sehen und Verfügbarkeitsprognosen anzufragen. LOGIN
SPECWE-HCI SMT-Hochstrominduktivität, 3.3 µH, 10.9 A
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Induktivität3.3 µH
Performance Nennstrom10.9 A
Sättigungsstrom 13.2 A
Sättigungsstrom @ 30%8 A
Gleichstromwiderstand9 mΩ
Eigenresonanzfrequenz65 MHz
MaterialSuperflux 
Verpackungseinheit1000 
Verfügbarkeit prüfen