Monolithic Power Systems EV2489DQ-01A

Beschreibung

The EV2489DQ-01A is an evaluation board for the MP2489DQ, a step-down converter designed in continuous current mode for driving the high brightness light emitting diodes (LEDs) from wide input voltage 8V-36V. If higher input voltage (up to 60V) is required, use B190instead of B140 in D1-D5. The MP2489 employs hysteretic controlarchitecture to regulate a high accuracy LED current, which is measured through an external high-side current sensing resistor. Moreover,this control scheme provides optimized circuitstabilization and very quick response time without the loop compensation. Its low 200mV average feedback voltage reduces power lossand improves the converter efficiency. The MP2489 implements PWM and Analog Dimming with DIM pin. The MP2489 includes under-voltage lockout function, thermal overload protection preventing damage in theevent of an outpu t overload.

Eigenschaften

• Internal 65V MOSFET
• Wide 8V to 60V Input Range
• High Efficiency (Up to 97%)
• Hysteretic Control
• PWM & Analog Dimming
• 1000:1 PWM Dimming Resolution
• UVLO, Thermal Shutdown

Typische Anwendungen

• Automotive/Decorative LED Lighting;Signs/Emergency Lighting;LED Backlighting
• Low Voltage Halogen Replacement;Low Voltage General Illumination

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers