MikroE MIC28511 | Demoboard Mikromedia 7 CAPACITIVE FPI

Beschreibung

Mikromedia 7 CAPACITIVE FPI ( FPI stands for Front Panel Integration) is designed as the complete solution which can be implemented directly into any project, with no additional hardware modifications required. Boards has a TFT display with a metal frame, and four corner mounting holes that enable simple installation in various kinds of industrial appliances. Also, this product can be easily built-in using various methods without it impacting its overall performance abilities.Mikromedia 7 CAPACITIVE FPI requires the use of an external programmer and debugger, preferably CODEGRIP or mikroProg. The installed MCU Card can be programmed and debugged over the JTAG/SWD compatible 2x5 pin header, labeled as PROG/DEBUG.

Eigenschaften

• 4.6V to 60V Operation Input Voltage Supply
• Up to 3A Output Current
• Integrated High-Side and Low-Side N-Channel MOSFETs
• HyperLight Load (MIC28511-1) and Hyper Speed Control (MIC28511-2) Architecture
• Enable Input and Power Good(PGOOD) Output
• Programmable Current-Limit and Foldback 'Hiccup" Mode Short-Circuit Protection
• Built-In 5V Regulator for Single-Supply Operation
• Adjustable 200 kHz to 680 kHz Switching Frequency
• Fixed 5ms Soft-Start
• Internal Compensation and Thermal Shutdown
• Thermally-Enhanced 24-Pin 3 mm × 4mm FQFN Package
• -40°C to +125°C Junction Temperature Range

Typische Anwendungen

• Industrial Power Supplies, Distributed Supply Regulation, Base Station Power Supplies

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers