Microchip MIC28510

Beschreibung

The Micrel MIC28510 is an adjustable frequency, synchronous buck regulator featuring unique adaptive on–time control architecture. The MIC28510 operates over an input supply range of 4.5V to 75V and provides a regulated output of up to 4A of output current. The output voltage is adjustable down to 0.8V with a guaranteed accuracy of ±1%.

Micrel's Hyper Speed Control™ architecture allows for ultra–fast transient response while reducing the output capacitance and also makes (High VIN) / (Low VOUT) operation possible. This adaptive tON ripple control architecture combines the advantages of fixed–frequency operation and fast transient response in a single device.

The MIC28510 offers a full suite of protection features to ensure protection of the IC during fault conditions. These include undervoltage lockout to ensure proper operation under power–sag conditions, internal soft–start to reduce inrush current, foldback current limit, "hiccup" mode shortcircuit protection, and thermal shutdown.

Eigenschaften

• Hyper Speed Control™ Architecture enables
• High delta V operation (VIN = 75V and VOUT = 0.8V)
• Small output capacitance
• 4.5V to 75V voltage input
• 4A output current capability, up to 95% efficiency
• Adjustable output voltage form 0.8V to 24V
• ≤1% FB accuracy
• Any Capacitor™ stable
• Zero-ESR to high–ESR output capacitors
• 100kHz to 500kHz switching frequency
• Internal compensation
• Foldback current–limit and “hiccup” mode short-circuit protection
• Thermal shutdown
• Supports safe startup into a pre-biased load
• -40°C to +125°C junction temperature range
• 28-pin 5mm x 6mm MLF® package

Typische Anwendungen

• Solar energy
• Dsitributed Power Systems
• Industrial power
• Communications/networking infrastructure

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers