IC-Hersteller Littelfuse

IC-Hersteller (103)

Littelfuse Z32F12811ATS

Cost-effective and High Performance 32-bit Microcontroller

Details

TopologieSonstige Topologie

Beschreibung

Zilog’s Z32F1281 MCU, a member of the ZNEO32! Family of microcontrollers is a cost-effective and highperformance 32-bit microcontroller. The Z32F1281 MCU provides 3-phase PWM generator units which are suitable for inverter bridges, including motor drive systems. The two built-in channels of these generators control two inverter motors simultaneously. Three 12-bit high speed ADC units with 16-channel analog multiplexed inputs are included to gather information from the motor. The Z32F1281 MCU can control up to two inverter motors or one inverter motor and the Power Factor Correction (PFC) function simultaneously. Four on-chip operational AMPs and four analog comparators are available to measure analog input signals. The operational amplifier can amplify the input signal to the proper signal range and transfer it to the ADC input channel. The comparator monitors external signals and helps create an internal emergency signal. Multiple powerful external serial interface engines communicate with on-board sensors.

Eigenschaften

  • High performance low-power Cortex-M3 core
  • 128 KB code Flash memory with cache function
  • 12 KB SRAM
  • 3-Phase Motor PWM with ADC triggering function
  • 2 channels
  • 1.5Msps high-speed ADC with burst conversion function
  • 2 or 3 units with 16 channel input
  • Built-in Programmable Gain Amplifier (PGA) for ADC inputs
  • 4 channels
  • 3 channels for 3 shunt resistor configuration
  • 1 channel for 1 shunt resistor configuration
  • Built-in analog comparator
  • 4 channels
  • 3 channels for 3 shunt resistor configuration
  • 1 channel for 1 shunt resistor configuration
  • System fail-safe function by clock monitoring
  • XTAL OSC fail monitoring
  • Precision internal oscillator clock (20MHz ±3%)
  • Watchdog timer
  • Six general purpose timers
  • Quadrature encoder interface counter
  • External communication ports: 4 UARTs, 2 I2Cs, 2 SPIs
  • High current driving port for UART photo couplers
  • Debug and emergency stop function
  • Real-time monitoring function support for more effective development
  • JTAG and Serial Wire Debug (SWD) in-circuit debugger
  • Various memory size and package options
  • LQFP-80, LQFP-64
  • Industrial grade operating temperature (-40 ~ +85℃)

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
C
Tol. C
VR(V (DC))
Bauform
Betriebstemperatur
DF(%)
RISO
Keramiktyp
L(mm)
B(mm)
H(mm)
Fl(mm)
Verpackung
Pins
Version
Typ
Montageart
IR(A)
Arbeitsspannung(V (AC))
Muster
WCAP-CSGP MLCCs 50 V(DC), 100 nF, ±10%
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität100 nF
Kapazität±10% 
Nennspannung50 V (DC)
Bauform0603 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor3 %
Isolationswiderstand5 GΩ
KeramiktypX7R Klasse II 
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
Verpackung7" Tape & Reel 
WR-BHD 2.54 mm Wannenstiftleiste, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Betriebstemperatur -40 °C up to +105 °C
Isolationswiderstand1000 MΩ
Länge33.06 mm
VerpackungTray 
Pins20 
VersionLow Profile 
TypGerade 
MontageartTHT 
Nennstrom3 A
Arbeitsspannung250 V (AC)
WR-PHD Stiftleisten - Einreihig, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Betriebstemperatur -40 °C up to +105 °C
Isolationswiderstand1000 MΩ
Länge5.08 mm
VerpackungBeutel 
Pins
TypGerade 
MontageartTHT 
Nennstrom3 A
Arbeitsspannung250 V (AC)
WR-PHD Stiftleisten - Einreihig, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Betriebstemperatur -40 °C up to +105 °C
Isolationswiderstand1000 MΩ
Länge7.62 mm
VerpackungBeutel 
Pins
TypGerade 
MontageartTHT 
Nennstrom3 A
Arbeitsspannung250 V (AC)