IC-Hersteller Infineon Technologies

IC-Hersteller (103)

Infineon Technologies ICC80QSG | Demoboard REF_ICC80QSG_84W1_BPA

ICC80QSG 84 W AC-DC reference design #1 with IPN70R450P7S

Details

TopologieSperrwandler
Eingangsspannung176-264 V
Ausgang 121 V / 4 A
IC-Revision1.0

Beschreibung

The REF_ICC80QSG_84W1_BPA is a flyback-based reference design, scalable from 65 W to >100 W and aimed for 12 V/18 V Li-Ion battery packs. It is based on the quasi-resonant flyback controller ICC80QSG and the renowned 700 V CoolMOS™ P7 technology in the small footprint and wave solderable SOT-223 package. The controller burst mode enables low standby <200 mW. The reference board includes a secondary-side auxiliary supply for battery switch and supply of a MCU. Measured efficiency is >90 percent at 230 VAC input voltage, providing excellent performance versus BOM cost ratio for chargers for consumer appliances.

Eigenschaften

  • Secondary-side regulated (SSR) constant current (CC) output
  • High efficiency and low EMI with quasi-resonant (QR) mode, switching in valley n (QRMn)
  • Efficiency > 90%, at 230 VAC input and full-load condition
  • Low standby power with reduced gate driver voltage in burst mode
  • Standby power <200 mW, at 230 VAC input and no-load condition
  • Configurable hysteresis of brown-in and brown-out
  • Adaptive brown-out level triggering based on output power protecting primary components from overheating and saturation
  • Internal overtemperature protection (OTP), output overvoltage protection (OVP), VCC OVP, MOSFET overcurrent protection (OCP), brown-in and brown-out protection, input OVP and open loop protection

Typische Anwendungen

  • PC, TV, Audio amplifier applications up to 130 W
  • Battery charging up to 130 W, Power tools, E-bikes

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
C
VR(V (AC))
Sicherheitsklasse
dV/dt(V/µs)
DF @ 1 kHz(%)
RISO
Raster(mm)
L(mm)
B(mm)
H(mm)
Verpackung
Pins
PCB/Kabel/Panel
Modularity
Typ
Wire Section
Muster
WCAP-FTXX Folienkondensatoren, 150 nF, 310 V (AC)
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität150 nF
Nennspannung310 V (AC)
SicherheitsklasseX2 
Spannungsanstiegsgeschwindigkeit210 V/µs
Verlustfaktor0.1 %
Isolationswiderstand30 GΩ
Raster15 mm
Länge18 mm
Breite6 mm
Höhe12 mm
VerpackungKarton 
WR-TBL Serie 322 - 3.81 mm Horizontal PCB Header, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Raster3.81 mm
Länge31.67 mm
VerpackungKarton 
Pins
PCB/Kabel/PanelKabel 
ModularityNein 
TypStiftleiste 
WR-TBL Serie 322 - 3.81 mm Horizontal PCB Header, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Raster3.81 mm
Länge43.1 mm
VerpackungKarton 
Pins11 
PCB/Kabel/PanelKabel 
ModularityNein 
TypStiftleiste 
WR-TBL Serie 361 - 3.81 mm Vertical, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Raster3.81 mm
Länge41.91 mm
VerpackungKarton 
Pins11 
PCB/Kabel/PanelKabel 
ModularityNein 
TypVertikal 
Wire Section 16 to 26 (AWG) 1.31 to 0.129 (mm²)
750845331
Flyback Transformer, –, –
Simu­lation
Downloads
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Produktserie Flyback Transformer