IC-Hersteller Diodes Incorporated

IC-Hersteller (103)

Diodes Incorporated AP63200 | Demoboard AP63200

Details

TopologieAbwärtswandler
Eingangsspannung32 V
Ausgang 112 V / 2 A
IC-RevisionDecember 2017

Beschreibung

The AP63200 is a 2A, synchronous buck converter with up to 32V wide input voltage range, which fully integrates a 140mΩ high-side MOSFET and a 70mΩ low-side MOSFET to provide high efficiency step-down DC/DC conversion. The AP63200 adopts peak current mode control with the integrated compensation network, which makes AP63200 easily to be used by minimizing the off-chip component count. The AP63200 supports the Pulse Skipping Modulation (PSM) with typical 22uA Ultra-low Quiescent and achieved high efficient performance at light load conditions.The AP63200 is an Electromagnetic Interference (EMI) friendly buck converter with implementing optimized design for EMI reduction. The AP63200 features Frequency Spread Spectrum (FSS) with ±6% jittering span of the 500 kHz switching frequency and modulation rate 1/512 of switching frequency to reduce the conducted EMI. The converter has proprietary designed gate driver scheme to resist switching node ringing without sacrificing MOSFET turn on and turn off time, which further erases high frequency radiation EMI noise caused by the MOSFETs hard switching.The AP63200 offers output overvoltage protection, cycle-by-cycle peak current limit, and thermal shutdown protection. The device is available in a low-profile TSOT23-6 package.

Eigenschaften

EMI Reduction with Switching NodeRinging-free 3.8V-32V Wide Input Voltage Range Up to 2A Continuous Output Load Current 0.8V ±1%Feedback Reference Voltage 22μA (Typ) No Load Quiescent Current Shutdown Current: <1μA Fully Integrated 140mΩ High Side MOSFETand 70mΩ Low Side MOSFET 500kHz Switching Frequency with 6%Frequency Spread Spectrum (FSS) Precision Enable Threshold for ProgrammableUVLO Threshold and Hysteresis Low Dropout Mode Operation No External Compensation Required 80ns Minimum On-time ULQ PSM in Light Load Condition 4ms Built in Soft Start Time Current Limit Protection Short Circuit Protection Over Output Voltage Protection Thermal Shutdown

Typische Anwendungen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
C
Tol. C
VR(V (DC))
Bauform
Betriebstemperatur
Q(%)
DF(%)
RISO
Keramiktyp
L(mm)
B(mm)
H(mm)
Fl(mm)
Verpackung
L(µH)
IRP,40K(A)
ISAT,30%(A)
RDC typ.(mΩ)
RDC max.(mΩ)
fres(MHz)
Montageart
Muster
WCAP-CSGP MLCCs 100 V(DC), 68 pF, ±5%
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität68 pF
Kapazität±5% 
Nennspannung100 V (DC)
Bauform0603 
Betriebstemperatur -55 °C up to +125 °C
Güte1000 %
Isolationswiderstand10 GΩ
KeramiktypNP0 Klasse I 
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
Verpackung7" Tape & Reel 
WCAP-CSGP MLCCs 100 V(DC), 100 pF, ±10%
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität100 pF
Kapazität±10% 
Nennspannung100 V (DC)
Bauform0603 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor2.5 %
Isolationswiderstand10 GΩ
KeramiktypX7R Klasse II 
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
Verpackung7" Tape & Reel 
WCAP-CSGP MLCCs 50 V(DC), 100 nF, ±10%
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität100 nF
Kapazität±10% 
Nennspannung50 V (DC)
Bauform0603 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor3 %
Isolationswiderstand5 GΩ
KeramiktypX7R Klasse II 
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
Verpackung7" Tape & Reel 
WE-XHMI SMT Speicherdrossel, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Bauform6030 
Betriebstemperatur -40 °C up to +125 °C
Länge6.65 mm
Breite6.45 mm
Höhe3 mm
Induktivität3.3 µH
Performance Nennstrom7.65 A
Sättigungsstrom @ 30%14.5 A
Gleichstromwiderstand19.2 mΩ
Gleichstromwiderstand21.12 mΩ
Eigenresonanzfrequenz31 MHz
MontageartSMT 
WE-XHMI SMT Speicherdrossel, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Bauform6060 
Betriebstemperatur -40 °C up to +125 °C
Länge6.65 mm
Breite6.45 mm
Höhe6.1 mm
Induktivität6.8 µH
Performance Nennstrom8.1 A
Sättigungsstrom @ 30%11.3 A
Gleichstromwiderstand17.6 mΩ
Gleichstromwiderstand19.36 mΩ
Eigenresonanzfrequenz22 MHz
MontageartSMT 
WE-XHMI SMT Speicherdrossel, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Bauform6060 
Betriebstemperatur -40 °C up to +125 °C
Länge6.65 mm
Breite6.45 mm
Höhe6.1 mm
Induktivität10 µH
Performance Nennstrom6.4 A
Sättigungsstrom @ 30%9.7 A
Gleichstromwiderstand26.5 mΩ
Gleichstromwiderstand29.15 mΩ
Eigenresonanzfrequenz18 MHz
MontageartSMT