Analog Devices MAX15303 | Demoboard MAX15303EVKIT1

Beschreibung

MAX15303 evaluation kit (EV kit) is a provenapplication circuit design for the MAX15303 digital DC-DC controller integrated circuit (IC). The EV kit allows the user to easily modify and test the EV kit with different operating conditions. The EV kit can be used as a standalone board if desired. However, to take full advantage of the IC’s capability, the user must connect the EV kit to a PC with the Maxim Power Tool MAXPOWERTOOL002# USB-to- PMBus™ interface dongle and then control and monitor the EV kit with Maxim’s digital Power Tool graphical user interface (GUI) software. The Power Tool GUI allows a PC to control the PMBus interface and to collect real-time data from the EV kit. The Power Tool is Windows XP®, Windows Vista®, and Windows®7 compatible. It providesa simple interface for exercising the features of the IC.

Eigenschaften

• InTune™ Digital Point-of-Load (PoL) Switched-Mode
• Power Supply (SMPS)
• Digital State-Space Control
• Dual-Edge-Modulated Pulse-Width Modulation(PWM)
• 300kHz to 1MHz Switching Frequency
• 5V to 12V Input Voltage Range Using Linear Mode
• 6.5V to 12V Input Voltage Range Using BabyBuck Mode
• 0.6V to 3.3V Output Voltage Range
• 6A Output Current Capability
• Single-Phase Operation
• Pin-Strap or PMBus Configuration
• SMB Connectors for Low-Noise Measurements
• Connectors for Multiple-Rail Evaluation
• PMBus Interface for Control and Monitoring
• High-Speed Serial-Port Diagnostics

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers