Analog Devices MAX15301AA02 | Demoboard MAX15301EVKITHP

Beschreibung

The MAX15301 evaluation kit (EV kit) is a proven application circuit design for the MAX15301 digital DC-DC controller integrated circuit (IC). The EV kit allows the userto easily modify and test the EV kit with different operating conditions. The EV kit can be used as a standalone board if desired. However, to take full advantage of the IC’scapability, the user must connect the EV kit to a PC with the Maxim PowerTool MAXPOWERTOOL002# USB-to- PMBus™ interface dongle and then control and monitorthe EV kit with Maxim’s digital PowerTool graphical user interface (GUI) software. The PowerTool GUI allows a PC to control the PMBus interface and to collect real-timedata from the EV kit. The PowerTool is Windows XP®, Windows Vista®, and Windows®7 compatible. It providesa simple interface for exercising the features of the IC.The EV kit ships with the MAX15301AA02+CJK installed, but can also be used to evaluate other pin-compatibleMAX15301xxxx ICs with replacement of U1. Request a free sample when ordering the EV kit.

Eigenschaften

• InTune™ Digital Point-of-Load (PoL) Switched-ModePower Supply (SMPS) Controller-
• Digital State-Space Control
• Dual-Edge-Modulated Pulse-Width Modulation(PWM)
• 300kHz to 1MHz Switching Frequency
• 5V to 14V Input Voltage Range Using Linear Mode
• 6.5V to 14V Input Voltage Range Using BabyBuckMode
• 0.6V to 3.3V Output Voltage Range
• 25A Output Current Capability
• Pin-Strap or PMBus Configuration
• SMB Connectors for Low-Noise Measurements
• Connectors for Multiple-Rail Evaluation
• PMBus Interface for Control and Monitoring

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers