Analog Devices LTC3101

Beschreibung

The LTC3101 is a complete power management solution for low power portable devices. It provides three high efficiency switching DC/DC converters which seamlessly transition from battery to USB/wall adapter power when available. A synchronous buck-boost regulator provides complete flexibility, allowing operation from a single Li-Ion/Polymer battery, 2 to 3 AA cells, a USB port or any other power source operating from 1.8V to 5.5V.

Two always-alive outputs, a 50mA LDO and a 200mA MAX output that tracks the higher voltage input supply, provide power for critical functions or additional external regulators. Flash memory cards can be directly powered from the protected 100mA Hot Swap output. Pushbutton control logic and a programmable-duration microprocessor reset generator simplify interfacing to a microprocessor while internal sequencing and independent enable pins provide flexible power-up options. The LTC3101 is available in a low profile (0.75mm) 24-lead 4mm × 4mm QFN package.

Eigenschaften

• Low Loss PowerPath™ Control: Seamless, Automatic Transition from Battery to USB or Wall Adapter Power
• Wide VIN Range: 1.8V to 5.5V
• Buck-Boost VOUT: 1.5V to 5.25V
• Buck-Boost Generates 3.3V at 300mA forVIN ≥ 1.8V, 3.3V at 800mA for VIN ≥ 3V
• Dual 350mA Buck Regulators, VOUT: 0.6V to VIN
• 38μA Quiescent Current in Burst Mode® Operation
• 1.8V, 50mA Always-On LDO
• Protected 100mA Hot Swap™ Output
• Pushbutton On/Off Control
• Current Limited 200mA MAX Output
• Programmable Power-Up Sequencing
• 24-lead 4mm × 4mm × 0.75mm QFN Package

Remarks:

• See Table 1 depicts the minimum required inductance for several common output voltages.

Typische Anwendungen

• Personal Handheld GPS Navigators
• Portable Medical Instruments
• Ultra-Portable Digital Video Cameras

Weiterführende Informationen

• Datenblatt