IC-Hersteller Analog Devices

IC-Hersteller (103)

Analog Devices LT8365 | Demoboard DC2838A

Low IQ Boost/SEPIC/Inverting Regulator with 150V, 1.5A Switch

Details

TopologieAufwärtswandler
Eingangsspannung9-30 V
Ausgang 1255 V / 0.01 A

Beschreibung

The LT8365 is a current mode DC/DC converter with a 1.5A, 150V switch operating from a 2.8V to 60V input. With a unique single feedback pin architecture it is capable of boost, SEPIC or inverting configurations. Burst Mode operation consumes as low as 9µA quiescent current to maintain high efficiency at very low output currents, while keeping typical output ripple below 15mV.An external compensation pin allows optimization of loop bandwidth over a wide range of input and output voltages and programmable switching frequencies between 100kHz and 500kHz. A SYNC/MODE pin allows synchronization to an external clock. It can also be used to select between burst or pulse-skipping modes of operation with or without spread spectrum frequency modulation for low EMI. For increased efficiency, a BIAS pin can accept a second input to supply the INTVCC regulator. Additional features include frequency foldback and programmable soft-start to control inductor current during startup.The LT8365 is available in a thermally enhanced 16-lead MSOP package with four pins removed for high voltage pin spacings.

Eigenschaften

  • Wide Input Voltage Range: 2.8V to 60V
  • Ultralow Quiescent Current and Low Ripple Burst Mode® Operation: IQ = 9µA
  • 1.5A, 150V Power Switch
  • Positive or Negative Output Voltage Programming with a Single Feedback Pin
  • Programmable Frequency (100kHz to 500kHz)
  • Synchronizable to an External Clock
  • Spread Spectrum Frequency Modulation for Low EMI
  • BIAS Pin for Higher Efficiency
  • Programmable Undervoltage Lockout (UVLO)
  • Thermally Enhanced 16-lead MSOP Package
  • AEC-Q100 Qualification in Progress

Typische Anwendungen

  • Portable Electronics
  • Telecom
  • Medical Diagnostic Equipment

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
L(µH)
IRP,40K(A)
ISAT,10%(A)
ISAT,30%(A)
RDC max.(mΩ)
fres(MHz)
Pins
Typ
Montageart
L(mm)
H(mm)
IR(A)
Arbeitsspannung(V (AC))
Betriebstemperatur
Muster
WE-LHMI SMT Speicherdrossel, 10 µH, 1.95 A
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Induktivität10 µH
Performance Nennstrom1.95 A
Sättigungsstrom 11.5 A
Sättigungsstrom @ 30%3.15 A
Gleichstromwiderstand243 mΩ
Eigenresonanzfrequenz23 MHz
Pins
MontageartSMT 
Länge4.45 mm
Höhe1.8 mm
Betriebstemperatur -40 °C up to +125 °C
WR-PHD Stiftleisten, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins10 
TypGerade 
MontageartTHT 
Länge10 mm
Nennstrom2 A
Arbeitsspannung200 V (AC)
Betriebstemperatur -40 °C up to +105 °C
WR-PHD Kurzschlussbrücken, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins
Nennstrom3 A
Arbeitsspannung200 V (AC)
Betriebstemperatur -25 °C up to +105 °C