IC-Hersteller Analog Devices

IC-Hersteller (103)

Analog Devices LT8362 | Demoboard SCP-LT8362-I-EVALZ

Signal Chain Power LT8362 Low IQ Inverting Regulator

Details

TopologieSonstige Topologie
Eingangsspannung4.5-42 V
Ausgang 1-15 V / 1 A

Beschreibung

Demonstration circuit SCP-LT8362-I-EVALZ features the LT8362 in a Cuk configuration. It operates with a switching frequency of 2MHz and is designed to convert a 4.5V to 42V source to –15V, with up to 1A output current (depending on input voltage).Like all boards in the Signal Chain Power series, this board is designed to be easily plugged into other SCP boards to form a complete signal chain power system, enabling fast evaluation of low power signal chains. To evaluate this board, some universal SCP hardware is required, namely: SCP-INPUT-EVALZ SCP-OUTPUT-EVALZ SCP-FILTER-EVALZ SCP-THRUBRD-EVALZ SCP-1X2BKOUT-EVALZ SCP-1X5BKOUT-EVALZ SCP-5X1-EVALZ To properly evaluate SCP series demo boards, you will need the SCP Configurator companion software. SCP Configurator can help you choose the right board and topology for your design.Note that the Demo Manual does not cover details important to the operation and configuration regarding the LT8362. Please refer to the LT8362 datasheet for a complete description of the part.

Eigenschaften

  • Wide Input Voltage Range: 2.8V to 60V
  • Ultralow Quiescent Current and Low Ripple Burst Mode® Operation: IQ = 9µA
  • 2A, 60V Power Switch
  • Positive or Negative Output Voltage Programming with a Single Feedback Pin
  • Programmable Frequency (300kHz to 2MHz)
  • Synchronizable to an External Clock
  • Spread Spectrum Frequency Modulation for Low EMI
  • BIAS Pin for Higher Efficiency
  • Programmable Undervoltage Lockout (UVLO)
  • Thermally Enhanced 10-lead 3mm × 3mm DFN and 16-lead MSOP packages
  • AEC-Q100 Qualified for Automotive Applications

Typische Anwendungen

  • Portable Electronics
  • Industrial and Automotive
  • Medical Diagnostic Equipment
  • Telecom

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
C
Tol. C
VR(V (DC))
Bauform
Betriebstemperatur
DF(%)
RISO
Keramiktyp
L(mm)
B(mm)
H(mm)
Fl(mm)
Verpackung
L1(µH)
L2(µH)
n
IR 1(A)
IR 2(A)
ISAT 1(A)
ISAT1(A)
ISAT2(A)
RDC1 typ(mΩ)
RDC2 typ(mΩ)
RDC1 max(mΩ)
RDC2 max(mΩ)
fres 1(MHz)
Muster
WCAP-CSGP MLCCs 25 V(DC), 1.5 nF, ±10%
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität1.5 nF
Kapazität±10% 
Nennspannung25 V (DC)
Bauform0805 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor3.5 %
Isolationswiderstand10 GΩ
KeramiktypX7R Klasse II 
Länge2 mm
Breite1.25 mm
Höhe0.8 mm
Pad Dimension0.5 mm
Verpackung7" Tape & Reel 
WCAP-CSGP MLCCs 25 V(DC), 220 nF, ±10%
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität220 nF
Kapazität±10% 
Nennspannung25 V (DC)
Bauform0603 
Betriebstemperatur -55 °C up to +125 °C
Verlustfaktor3.5 %
Isolationswiderstand2.3 GΩ
KeramiktypX7R Klasse II 
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
Verpackung7" Tape & Reel 
WE-TDC SMT-Doppeldrossel, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Nennspannung80 V (DC)
Bauform8018 
Betriebstemperatur -40 °C up to +125 °C
Länge8 mm
Breite8 mm
Höhe1.8 mm
Induktivität 16.8 µH
Induktivität 26.8 µH
Übersetzungsverhältnis1:1 
Nennstrom 11.25 A
Nennstrom 21.25 A
Sättigungsstrom [1]2 A
Sättigungsstrom 12 A
Sättigungsstrom 22 A
Gleichstromwiderstand 1128 mΩ
Gleichstromwiderstand 2128 mΩ
Gleichstromwiderstand 1146 mΩ
Gleichstromwiderstand 2146 mΩ
Eigenresonanzfrequenz [1]46 MHz