| Topologie | Eintaktflusswandler |
| Eingangsspannung | 37-57 V |
| Ausgang 1 | 12 V / 7 A |
Demonstration circuit 2262 is a PoE Powered Device (PD)with a synchronous forward isolated power supply featuringthe LT®4276 and an ideal diode bridge controller (LT4321).The LT4276 provides IEEE802.3af (PoE, Type 1),IEEE802.3at (PoE+, Type 2), and LTPoE++ PD interfacingand power supply control. When the PD is connected toa PSE, the LT4276 turns on an external, low-resistance,high-power N-channel Hot Swap™ FET. The LT4276 controlsa high-power, small-sized power supply that utilizesa highly efficient, synchronously rectified, active clamp forward topology. The LT4321 provides further efficiencyimprovement by minimizing bridge losses.The DC2262A-B supplies a 12V output at up to 7A. Italso demonstrates the use of an optional auxiliary powersupply input of 48V. When present, the auxiliary supplytakes priority over the PoE power path.
Artikel Nr. | Datenblatt | Simulation | Downloads | Status | Produktserie | L(µH) | IRP,40K(A) | ISAT,10%(A) | ISAT,30%(A) | RDC(mΩ) | fres(MHz) | VPE | IR 1(A) | L1(mH) | RDC1 max.(Ω) | VR(V (AC)) | VT(V (RMS)) | Material | L(mm) | B(mm) | H(mm) | Montageart | MusterVerfügbarkeit & Muster | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() | SPECWE-HCI SMT-Hochstrominduktivität, 4.9 µH, 8.3 A | Verfügbarkeit – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWE-HCI SMT-Hochstrominduktivität | Induktivität4.9 µH | Performance Nennstrom8.3 A | Sättigungsstrom 12.2 A | Sättigungsstrom @ 30%6.5 A | Gleichstromwiderstand14.5 mΩ | Eigenresonanzfrequenz56 MHz | Verpackungseinheit1000 | – | – | – | – | – | MaterialSuperflux | Länge7 mm | Breite6.9 mm | Höhe4.8 mm | MontageartSMT | –Verfügbarkeit prüfen | |||
749022016 | SPEC10/100/1000 Base-T SMT Transformer, 350 µH, – | Verfügbarkeit – | Downloads– | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | Produktserie 10/100/1000 Base-T SMT Transformer | Induktivität350 µH | – | – | – | – | – | – | – | – | – | – | Prüfspannung1500 V (RMS) | – | Länge18.16 mm | Breite16 mm | Höhe10.16 mm | MontageartSMT | –Verfügbarkeit prüfen | ||
![]() | SPECWE-LF SMD Stromkompensierte Netzdrossel in SMT, 2200 µH, – | Verfügbarkeit – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWE-LF SMD Stromkompensierte Netzdrossel in SMT | Induktivität2200 µH | – | – | – | – | – | Verpackungseinheit200 | Nennstrom [1]2.75 A | Induktivität [1]2.2 mH | Gleichstromwiderstand [1]0.1 Ω | Nennspannung250 V (AC) | Prüfspannung1500 V (RMS) | MaterialMnZn | Länge23.3 mm | Breite18.5 mm | Höhe11.5 mm | – | –Verfügbarkeit prüfen |
| Erwartete Verfügbarkeit | Eingehender Bestand | Menge |
|---|---|---|
| Aktuelle Verfügbarkeit | – | – |