IC-Hersteller Analog Devices

IC-Hersteller (103)

Analog Devices LT3799-1 franjic rev | Demoboard DC1816A

LT3799-1 Offline Isolated Flyback LED Driver with PFC

Details

TopologieSperrwandler
Eingangsspannung90-305 V
Ausgang 136 V / 3 A
IC-RevisionB

Beschreibung

Demonstration circuit 1816A is an off-line isolated flyback LED driver featuring LT®3799-1. The demo board provides a single constant current output of 3A over an LED string voltage from 22V to 38V. It is optimized to operate over a wide AC input voltage range (90VAC to 305VAC, 47Hzto 63Hz). LED current typically stays within ±5% over the whole input voltage range. It provides a high power factor (>0.9) enabling a single design to be used worldwide. It is also designed to comply with the IEC 61000-3-2 ClassC harmonics standard and the EN55015B conducted EMI standard.

The LT3799-1 controls an isolated flyback converter in boundary mode. Its novel current sensing scheme delivers a well-regulated output current to the secondary side without using an opto-coupler. Open- and shorted-LEDprotection ensures long term reliability.

The LT3799-1 is available in a low profile, thermallyenhanced 16-lead MSOP package.

The LT3799-1 data sheet gives a complete description of the device, operation and application information. The data sheet must be read in conjunction with this quick start guide for demo circuit 1816A.

Eigenschaften

Remarks:L1=10mH L2=10mH L3=150uHAnd Transformer T1 UsedRefer page no.7

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
Vin
VOut1(V)
IOut1(A)
Vaux(V)
RDC 1(Ω)
RDC 2(Ω)
RDC 3(Ω)
fswitch(kHz)
NPRI : NSEC : NAUX
ISAT(A)
VT(V (AC))
L(mm)
B(mm)
H(mm)
Montageart
Bauform
L(µH)
IR(A)
RDC max.(Ω)
MusterVerfügbarkeit & Muster
SPECWE-OLLT Offline Flyback Transformers, 85 - 265 V (AC), 36 V
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Input Voltage 85 - 265 V (AC)
Ausgangsspannung 136 V
Ausgangsstrom 13 A
Hilfsspannung25 V
Gleichstromwiderstand 10.135 Ω
Gleichstromwiderstand 20.027 Ω
Gleichstromwiderstand 30.055 Ω
Switching Frequency 75
Übersetzungsverhältnis4:1:0.67 
Sättigungsstrom7.4 A
Prüfspannung4500 V (AC)
Länge39.6 mm
Breite43.18 mm
Höhe30.48 mm
MontageartTHT 
BauformETD34 
Induktivität180 µH
Verfügbarkeit prüfen
SPECWE-FI Funkentstördrossel, –, –
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Länge16.5 mm
Breite10.7 mm
MontageartTHT 
Induktivität150 µH
Nennstrom2.5 A
Gleichstromwiderstand0.1 Ω
Verfügbarkeit prüfen