Analog Devices LT3745

Beschreibung

The LT®3745 integrates a 16-channel LED driver with a 55V buck controller. The LED driver lights up to 75mA/36V of LEDs in series per channel, and the buck controller generates an adaptive bus voltage supplying the parallel LED strings. Each channel has individual 6-bit dot correction current adjustment and 12-bit grayscale PWM dimming. Both dot correction and grayscale are accessible via a serial data interface in TTL/CMOS logic. A ±3% LED current matching and a 0.5µs minimum LED on-time can be achieved at 50mA per channel. The LT3745 performs full diagnostic and protectionagainst open/short LED and overtemperature fault. The fault status is sent back through the serial data interface. The 30MHz fully-buffered, skew-balanced, cascadable serial data interface makes the chip extremely suitablefor large screen LCD dynamic backlighting and mono-, multi-, full-color LED displays.

Eigenschaften

• 6V to 55V Power Input Voltage Range
• 16 Independent LED Outputs Up to 75mA/36V
• ±3% LED Current Matching at 50mA (Typ ±1%)
• 6-Bit Dot Correction Current Adjustment
• 12-Bit Grayscale PWM Dimming
• 0.5µs Minimum LED On-Time
• Adaptive LED Bus Voltage for High Efficiency
• Cascadable 30MHz Serial Data Interface
• Full Diagnostic and Protection: Individual Open/Short
• LED and Overtemperature Fault
• 40-Lead 6mm × 6mm QFN Package.

Typische Anwendungen

• LED Billboards and Signboards
• Large Screen Display LED Backlighting
• Mono-, Multi-, Full-Color LED Displays

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers