IC-Hersteller ROHM

IC-Hersteller (103)

ROHM BD7679G

PWM Control Type DC/DC Converter IC for AC/DC Driver

Details

TopologieSonstige Topologie
Eingangsspannung300 V

Beschreibung

BD7679G is a PWM controller type DC/DC converter IC for AC/DC that provides an optimum system for all products that requires an electrical outlet. This product supports both isolated and non-isolated devices. IC enables simple design of low-power electrical converters. With switching MOSFET and current detection resistor as external devices, it enables more freedom in design. Since the peak current control is utilized, peak current is controlled in each cycles, application excels wide bandwidth and transient response. BD7679G includes various protective functions such as soft start function, burst function, per-cycle over current limiter, VCC overvoltage protection and overload protection. An external stop pin (COMP pin) is provided, so that switching stopping can be set by external signals. The function is available as overheating protection and over voltage protection of secondary output, so on. The PWM switching frequency is fixed at 65 kHz. A frequency hopping function is included which contributes to low EMI.

Eigenschaften

  • PWM frequency of 65kHz
  • PWM current mode method
  • Low circuit current when UVLO is ON (12μA at VCC=12V)
  • Low circuit current without load (Burst operation when load is light)
  • Built-in SW frequency hopping function
  • 250ns leading-edge blanking
  • VCC UVLO / OVP (Auto restart)
  • Per-cycle over current protection circuit
  • Soft start
  • Output overload protection(Auto-restart protection)
  • External stop function for COMP pin (Auto restart)

Typische Anwendungen

  • AC adapters and household appliances

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
Pins
PCB/Kabel/Panel
Modularity
Typ
Wire Section
C
Sicherheitsklasse
dV/dt(V/µs)
DF @ 1 kHz(%)
RISO
Raster(mm)
Verpackung
Endurance(h)
IRIPPLE(mA)
ILeak(µA)
DF(%)
Ø D(mm)
IR(A)
L(mH)
RDC max.(mΩ)
VR(V (AC))
VT(V (AC))
Material
L(mm)
B(mm)
H(mm)
Montageart
Muster
WR-TBL Series 213 - 5.00 mm Horiz.l Entry Modular, 2, Käfigzugklemme
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins
PCB/Kabel/PanelPCB 
ModularityJa 
TypHorizontal 
Wire Section 26 to 16 (AWG) 0.5 to 1.5 (mm²)
Raster5 mm
VerpackungKarton 
Nennstrom10 A
Länge10 mm
MontageartTHT 
WE-CMB Stromkompensierte Netzdrossel, 4, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins
Nennstrom0.5 A
Induktivität20 mH
Gleichstromwiderstand1000 mΩ
Nennspannung250 V (AC)
Prüfspannung1500 V (AC)
MaterialMnZn 
Länge15 mm
Breite7.8 mm
Höhe17.5 mm
MontageartTHT 
WCAP-FTXX Folienkondensatoren, –, Across the mains
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität220 nF
SicherheitsklasseX2 
Spannungsanstiegsgeschwindigkeit300 V/µs
Verlustfaktor0.1 %
Isolationswiderstand30 GΩ
Raster10 mm
VerpackungLose 
Nennspannung310 V (AC)
Länge13 mm
Breite8 mm
Höhe14 mm
MontageartBoxed THT 
WCAP-ATG5 Aluminium-Elektrolytkondensatoren, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität10 µF
Raster2 mm
VerpackungAmmopack 
Endurance 2000
Rippelstrom48 mA
Leckstrom5 µA
Verlustfaktor10 %
Durchmesser5 mm
Nennspannung50 V (AC)
Länge11 mm