IC manufacturers ROHM

IC manufacturers (103)

ROHM BD7679G

PWM Control Type DC/DC Converter IC for AC/DC Driver

Overview

TopologyOther Topology
Input voltage300 V

Description

BD7679G is a PWM controller type DC/DC converter IC for AC/DC that provides an optimum system for all products that requires an electrical outlet. This product supports both isolated and non-isolated devices. IC enables simple design of low-power electrical converters. With switching MOSFET and current detection resistor as external devices, it enables more freedom in design. Since the peak current control is utilized, peak current is controlled in each cycles, application excels wide bandwidth and transient response. BD7679G includes various protective functions such as soft start function, burst function, per-cycle over current limiter, VCC overvoltage protection and overload protection. An external stop pin (COMP pin) is provided, so that switching stopping can be set by external signals. The function is available as overheating protection and over voltage protection of secondary output, so on. The PWM switching frequency is fixed at 65 kHz. A frequency hopping function is included which contributes to low EMI.

Features

  • PWM frequency of 65kHz
  • PWM current mode method
  • Low circuit current when UVLO is ON (12μA at VCC=12V)
  • Low circuit current without load (Burst operation when load is light)
  • Built-in SW frequency hopping function
  • 250ns leading-edge blanking
  • VCC UVLO / OVP (Auto restart)
  • Per-cycle over current protection circuit
  • Soft start
  • Output overload protection(Auto-restart protection)
  • External stop function for COMP pin (Auto restart)

Typical applications

  • AC adapters and household appliances

Products

Order Code
Data­sheet
Simu­lation
Downloads
Status
Product series
Pins
PCB/Cable/Panel
Modularity
Type
Wire Section
C
Safety Class
dV/dt(V/µs)
DF @ 1 kHz(%)
RISO
Pitch(mm)
Packaging
Endurance(h)
IRIPPLE(mA)
ILeak(µA)
DF(%)
Ø D(mm)
IR(A)
L(mH)
RDC max.(mΩ)
VR(V (AC))
VT(V (AC))
Material
L(mm)
W(mm)
H(mm)
Mount
Samples
WR-TBL Series 213 - 5.00 mm Horiz.l Entry Modular, 2, Rising Cage Clamp
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Pins
PCB/Cable/PanelPCB 
ModularityYes 
TypeHorizontal 
Wire Section 26 to 16 (AWG) 0.5 to 1.5 (mm²)
Pitch5 mm
PackagingBox 
Rated Current10 A
Length10 mm
MountTHT 
WE-CMB Common Mode Power Line Choke, 4, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Pins
Rated Current0.5 A
Inductance20 mH
DC Resistance1000 mΩ
Rated Voltage250 V (AC)
Insulation Test Voltage1500 V (AC)
MaterialMnZn 
Length15 mm
Width7.8 mm
Height17.5 mm
MountTHT 
WCAP-FTXX Film Capacitors, –, Across the mains
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Capacitance220 nF
Safety ClassX2 
Rate of Voltage Rise300 V/µs
Dissipation Factor0.1 %
Insulation Resistance30 GΩ
Pitch10 mm
PackagingBulk 
Rated Voltage310 V (AC)
Length13 mm
Width8 mm
Height14 mm
MountBoxed THT 
WCAP-ATG5 Aluminum Electrolytic Capacitors, –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Capacitance10 µF
Pitch2 mm
PackagingAmmopack 
Endurance 2000
Ripple Current48 mA
Leakage Current5 µA
Dissipation Factor10 %
Diameter5 mm
Rated Voltage50 V (AC)
Length11 mm