IC manufacturers Semtech

IC manufacturers (103)

Semtech TS30041

High Efficiency 1A/2A Current-Mode Synchronous Buck Converter, 1MHz

Overview

TopologyBuck Converter
Input voltage4.5-40 V
Output 15 V / 1 A
IC revision2.2

Description

The TS30041 (1A) and TS30042 (2A) are DC/DC synchronous switching regulators with fully integrated power switches, internal compensation, and full fault protection. The switching frequency of 1MHz enables the use of small ! lter components resulting in minimal board space and reduced BOM costs. The TS30041/42 utilizes current mode feedback in normal regulation PWM mode. When the regulator is placed in standby (EN is low), the device draws less than 10uA quiescent current. The TS30041/42 integrates a wide range of protection circuitry including input supply under-voltage lockout, output voltage soft start, current limit, and thermal shutdown. The TS30041/42 includes supervisory reporting through the PG (Power Good) open drain output to interface other components in the system.

Features

  • Fixed output voltage choices: 1.5V, 1.8V, 2.5V, 3.3V, and 5V with +/- 2% output tolerance
  • Adjustable version output voltage range: 0.9V to (VCC - 1V) with +/- 1.5% reference
  • Wide input voltage range: 4.5V to 40V (42V Abs Max)
  • 1MHz +/- 10% ! xed switching frequency
  • Continuous output current: 1A (TS30041), 2A (TS30042)
  • High e" ciency up to 95%
  • Current mode PWM control with PFM mode for improved light load e" ciency
  • Voltage supervisor for VOUT reported at the Power Good (PG) pin
  • Input supply under voltage lockout
  • Soft start for controlled startup with no overshoot
  • Full protection for over-current, over-temperature, and VOUT over-voltage
  • SYNC function on EN/SYNC pin to control switching frequency
  • Less than 10uA in standby mode
  • Low external component count

Typical applications

  • On-card switching regulators
  • Industrial power supplies/ Set-top box, DVD, LCD, LED supply

Products

Order Code
Data­sheet
Simu­lation
Downloads
Status
Product series
C
Tol. C
VR(V (DC))
Size
Operating Temperature
DF(%)
RISO
Ceramic Type
L(mm)
W(mm)
H(mm)
Fl(mm)
Packaging
L(µH)
IR(A)
ISAT(A)
RDC max.(Ω)
fres(MHz)
Samples
WCAP-CSGP MLCCs 16 V(DC), 22 nF, ±10%
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Capacitance22 nF
Capacitance±10% 
Rated Voltage16 V (DC)
Size0402 
Operating Temperature -55 °C up to +125 °C
Dissipation Factor3.5 %
Insulation Resistance10 GΩ
Ceramic TypeX7R Class II 
Length1 mm
Width0.5 mm
Height0.5 mm
Pad Dimension0.25 mm
Packaging7" Tape & Reel 
WCAP-CSGP MLCCs 10 V(DC), 22 µF, ±10%
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Capacitance22 µF
Capacitance±10% 
Rated Voltage10 V (DC)
Size1206 
Operating Temperature -55 °C up to +125 °C
Dissipation Factor10 %
Insulation Resistance0.005 GΩ
Ceramic TypeX7R Class II 
Length3.2 mm
Width1.6 mm
Height1.6 mm
Pad Dimension0.5 mm
Packaging7" Tape & Reel 
WE-PD2 SMT Power Inductor, –, –
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Size5848 
Operating Temperature -40 °C up to +125 °C
Length5.2 mm
Width5.8 mm
Height4.5 mm
Inductance4.7 µH
Rated Current3 A
Saturation Current5.5 A
DC Resistance0.071 Ω
Self Resonant Frequency33 MHz