IC manufacturers Microchip

IC manufacturers (103)

Microchip LAN8710A

Small Footprint MII/RMII 10/100 Etherne Transceiver with HP Auto-MDIX and flexPWR® Technology

Overview

TopologyOther Topology
IC revision1.4

Description

The LAN8710A/LAN8710Ai is a low-power 10BASE-T/100BASE-TX physical layer (PHY) transceiver

with variable I/O voltage that is compliant with the IEEE 802.3-2005 standards.

The LAN8710A/LAN8710Ai supports communication with an Ethernet MAC via a standard MII (IEEE 802.3u)/RMII interface. It contains a full-duplex 10-BASE-T/100BASE-TX transceiver and supports 10Mbps (10BASE-T) and 100Mbps (100BASE-TX) operation. The LAN8710A/LAN8710Ai implementsauto-negotiation to automatically determine the best possible speed and duplex mode of operation. HP Auto-MDIX support allows the use of direct connect or cross-over LAN cables.

The LAN8710A/LAN8710Ai supports both IEEE 802.3-2005 compliant and vendor-specific register functions. However, no register access is required for operation. The initial configuration may be selected via the configuration pins as described in Section 3.7, "Configuration Straps," on page 36. Register-selectable configuration options may be used to further define the functionality of the transceiver.

Per IEEE 802.3-2005 standards, all digital interface pins are tolerant to 3.6V. The device can be configured to operate on a single 3.3V supply utilizing an integrated 3.3V to 1.2V linear regulator. The linear regulator may be optionally disabled, allowing usage of a high efficiency external regulator for lower system power dissipation.

The LAN8710A/LAN8710Ai is available in both extended commercial and industrial temperature range versions. A typical system application is shown in Figure 1.1.

Features

  • Single-Chip Ethernet Physical Layer Transceiver
  • (PHY)
  • Comprehensive flexPWR® Technology
  • Flexible Power Management Architecture
  • LVCMOS Variable I/O voltage range: +1.6V to +3.6V
  • Integrated 1.2V regulator with disable feature
  • HP Auto-MDIX support
  • ???? Small footprint 32-pin QFN lead-free RoHS compliantpackage (5 x 5 x 0.9mm height)

Typical applications

  • DSL Modems/Routers
  • Digital Video Recorders
  • Gaming Consoles
  • Video Record/Playback Systems
  • IP and Video Phones
  • Digital Televisions
  • Cable Modems/Routers
  • Digital Media Adaptors/Servers
  • Set-Top Boxes
  • Networked Printers and Servers
  • Embedded Telecom Applications
  • LAN on Motherboard
  • POE Applications (Refer to SMSC Application Note 17.18
  • Wireless Access Points
  • Test Instrumentation

Products

Order Code
Data­sheet
Simu­lation
Downloads
Status
Product series
Data rate
PoE
Ports
Tab
Improved CMRR
Operating Temperature
LED
PHY Chip Mode
Mount
Shield Tabs
Samples
WE-RJ45 LAN Transformer, 100BASE-TX, non-PoE
Simu­lation
Status Activei| Production is active. Expected lifetime: >10 years.
Data rate100BASE-TX 
PoEnon-PoE 
Ports1x1 
Tab PositionDown 
Improved Common Mode RejectionNo 
Operating Temperature 0 °C up to +70 °C
LED (Left-Right)green-yellow 
PHY Chip Modecurrent & voltage 
MountTHT 
Shield TabsNo