Analog Devices ADP1055

Description

The ADP1055 is a flexible, feature-rich digital secondary side controller that targets ac-to-dc and isolated dc-to-dc secondary side applications. The ADP1055 is optimized for minimal component count, maximum flexibility, and minimum design time. Features include differential remote voltage sense, primary and secondary side current sense, pulse-width modulation (PWM) generation, frequency synchronization, redundant OVP, and current sharing. The control loop digital filter and compensation terms are integrated and can be programmed over the PMBus™ interface. Programmable protection features include overcurrent (OCP), overvoltage (OVP) limiting, undervoltage lockout (UVLO), and external overtemperature (OTP).

The built-in EEPROM provides extensive programming of the integrated loop filter, PWM signal timing, inrush current, and soft start timing and sequencing. Reliability is improved through a built-in checksum and programmable protection circuits.

A comprehensive GUI is provided for easy design of loop filter characteristics and programming of the safety features. The industry-standard PMBus provides access to the many moni-toring and system test functions. The ADP1055 is available in a 32-lead LFCSP and operates from a single 3.3 V supply.

Features

−40°C to +125°C operation

• PMBus Revision 1.2 compliant with PEC and extended manufacturer specific commands
• 32-bit password protection with command masking
• 64 address selections (16 base addresses, expandable to 64)
• 6 PWM control signals, 625 ps resolution
• Frequency from 48 kHz to 1 MHz
• Duty cycle double update rate
• Digital control loop (PID + additional pole or zero configurability)
• Programmable loop filters (CCM, DCM, low/normal temperature)
• Fast line voltage feedforward
• Adaptive dead time compensation for improved efficiencyRemote voltage sense
• Redundant programmable OVP
• Current sense
• Primary side cycle-by-cycle fast protection
• Secondary side cycle-by-cycle fast overcurrent protection

－Secondary side averaged reverse current protection using diode emulation mode with fixed debounce

Synchronous rectifier control for improved efficiency

• in light load mode
• Nonlinear gain for faster transient response from DCM to CCM
• Frequency synchronization
• Soft start and soft stop functionality
• Average and peak constant current mode
• External PN junction temperature sensing
• 4 GPIOs (2 GPIOs configurable as active clamp snubber PWMs)
• Extended black box data recorder for fault recording
• User trimming on input and output voltages and currents
• Digital current sharing

Typical applications

• Isolated dc-to-dc power supplies and modules
• Redundant power supply systems

More information

• Datasheet
• IC product information