Xilinx XC7Z010

Beschreibung

The Zynq®-7000 All Programmable SoCs are available in -3, -2, -1, and -1LI speed grades, with -3 having the highest performance. The -1LI devices can operate at either of two programmable logic (PL) VCCINT/VCCBRAM voltages, 0.95V and 1.0V, and are screened for lower maximum staticpower. The speed specification of a -1LI device is the same as the -1 speed grade. When operated at PL VCCINT/VCCBRAM = 0.95V, the -1LI static and dynamic power is reduced. Zynq-7000 device DC and AC characteristics are specified in commercial, extended, industrial and expanded (Q-temp) temperature ranges. Except for the operating temperature range or unlessotherwise noted, all the DC and AC electrical parameters are the same for a particular speed grade (that is, the timing characteristics of a -1 speed grade industrial device are the same as for a -1 speed grade commercial device). However, only selected speed grades and/or devices are available inthe commercial, extended, industrial, or Q-temp temperature ranges.All supply voltage and junction temperature specifications are representative of worst-case conditions. The parameters included are common to popular designs and typical applications.

The available device/package combinations are outlined in:

• Zynq-7000 All Programmable SoC Overview (DS190)

• XA Zynq-7000 All Programmable SoC Overview (DS188)

• Defense-grade Zynq-7000Q All Programmable SoC Overview (DS196)

This Zynq-7000 AP SoC data sheet, which covers the specifications for the XC7Z010, XA7Z010, XC7Z015, XC7Z020, XA7Z020, and XQ7Z020, complements the Zynq-7000 AP SoC documentation suite available on the Xilinx website at www.xilinx.com/zynq.

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers