IC-Hersteller Texas Instruments

IC-Hersteller (103)

Texas Instruments LM5145

LM5145 6-V to 75-V Synchronous Buck DC-DC Controller With Wide Duty Cycle Range

Details

TopologieAbwärtswandler
Eingangsspannung14.4-48 V
Schaltfrequenz100-1000 kHz
Ausgang 112 V / 10 A
IC-RevisionA

Beschreibung

The LM5145 75-V synchronous buck controller is designed to regulate from a high input voltage source or from an input rail subject to high voltage transients, minimizing the need for external surge suppression components. A high-side switch minimum on-time of 40 ns facilitates large step-down ratios, enabling the direct step-down conversion from 48 V to low-voltage rails for reduced system complexity and solution cost. The LM5145 continues to operate at nearly 100% duty cycle during input voltage dips as low as 6 V, making it well suited for high-performance industrial control, robotic, datacom and RF power amplifier applications.

Eigenschaften

Versatile Synchronous Buck DC-DC Controller– Wide Input Voltage Range of 6 V to 75 V– Adjustable Output Voltage From 0.8 V to 60 V

  • Meets EN55022 / CISPR 22 EMI Standards
  • Lossless RDS(on) or Shunt Current Sensing
  • Switching Frequency From 100 kHz to 1 MHz– SYNC In and SYNC Out Capability
  • 40-ns Minimum On-Time for High VIN / VOUT Ratio
  • 140-ns Minimum Off-Time for Low Dropout
  • 0.8-V Reference With ±1% Feedback Accuracy
  • 7.5-V Gate Drivers for Standard VTH MOSFETs– 14-ns Adaptive Dead-Time Control– 2.3-A Source and 3.5-A Sink Capability– Low-Side Soft-Start for Prebiased Start-Up
  • Adjustable Soft-Start or Optional Voltage Tracking
  • Fast Line and Load Transient Response– Voltage-Mode Control With Line Feedforward– High Gain-Bandwidth Error Amplifier
  • Precision Enable Input and Open-Drain PowerGood Indicator for Sequencing and Control
  • Inherent Protection Features for Robust Design– Hiccup Mode Overcurrent Protection– Input UVLO With Hysteresis– VCC and Gate Drive UVLO Protection– Thermal Shutdown Protection With Hysteresis
  • VQFN-20 Package With Wettable Flanks
  • Create a Custom Design Using the LM5145 With

Typische Anwendungen

  • Industrial Motor Drives
  • Remote Radio Unit (RRU) and BTS,Networking and Computing Power
  • Non-Isolated PoE and IP Cameras

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
C
Tol. C
VR(V (DC))
Bauform
Betriebstemperatur
DF(%)
RISO
Keramiktyp
L(mm)
B(mm)
H(mm)
Fl(mm)
Verpackung
L(µH)
IRP,40K(A)
ISAT,10%(A)
ISAT,30%(A)
RDC max.(mΩ)
fres(MHz)
Montageart
Muster
WCAP-CSGP MLCCs 16 V(DC), 47 µF, ±20%
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität47 µF
Kapazität±20% 
Nennspannung16 V (DC)
Bauform1210 
Betriebstemperatur -55 °C up to +85 °C
Verlustfaktor10 %
Isolationswiderstand0.002 GΩ
KeramiktypX5R Klasse II 
Länge3.2 mm
Breite2.5 mm
Höhe2.5 mm
Pad Dimension0.75 mm
Verpackung7" Tape & Reel 
WE-LHMI SMT Speicherdrossel, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Bauform1365 
Betriebstemperatur -40 °C up to +125 °C
Länge13.65 mm
Breite12.5 mm
Höhe6.2 mm
Induktivität4.7 µH
Performance Nennstrom15.1 A
Sättigungsstrom 118.4 A
Sättigungsstrom @ 30%35.8 A
Gleichstromwiderstand8.4 mΩ
Eigenresonanzfrequenz13.9 MHz
MontageartSMT