IC-Hersteller Texas Instruments

IC-Hersteller (103)

Texas Instruments BQ51003YFPR

BQ51003 Wireless Power Receiver

Details

TopologieDrahtlose Energieübertragung
Eingangsspannung4-10 V
Ausgang 10.5 A
IC-Revision00

Beschreibung

The bq51003 is an advanced, integrated, receiver IC for wireless power transfer in portable applications optimized for 2.5-W and below applications. The device provides the AC-DC power conversion while integrating the digital control required to comply with the Qi v1.1 communication protocol. Together with the bq500210 transmitter controller, the bq51003 enables a complete contact-less power transfer system for a wireless power supply solution. By using near-field inductive power transfer, the receiver coil embedded in the portable device receives the power transmitted by the transmitter coil through mutually coupled inductors. The AC signal from the receiver coil is then rectified and regulated to be used as a power supply for down-system electronics. Global feedback is established from the secondary to the transmitter to stabilize the power transfer process through back-scatter modulation. This feedback is established by using the Qi v1.1 communication protocol supporting up to 2.5-W applications.The device integrates a low-impedance full synchronous rectifier, low-dropout regulator, digital control, and accurate voltage and current loops.

Eigenschaften

Integrated Wireless Power Supply ReceiverSolution – Optimized for 2.5-W Applications 93% Overall Peak AC-DC EfficiencyFull Synchronous RectifierWPC v1.1 Compliant Communication ControlOutput Voltage ConditioningOnly IC Required Between Rx coil and Output

Wireless Power Consortium (WPC) v1.1Compliant (FOD Enabled) Highly AccurateCurrent SenseDynamic Rectifier Control for Improved LoadTransient ResponseDynamic Efficiency Scaling for OptimizedPerformance Over Wide Range of Output PowerAdaptive Communication Limit for RobustCommunicationSupports 20-V Maximum InputLow-power Dissipative Rectifier OvervoltageClamp (VRECT-OVP = 15 V)Thermal ShutdownMultifunction NTC and Control Pin forTemperature Monitoring, Charge Complete andFault Host Control

Typische Anwendungen

  • Portable Media Players
  • Digital Cameras
  • Headsets
  • Cell Phones and Smart Phones
  • WPC Compliant Receivers
  • Hand-held Devices

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
µʹ
@ 1 MHz
µʹ
@ 13.56 MHz
µʹʹ
@ 13.56 MHz
L(mm)
B(mm)
H(mm)
RS(GΩ)
ISAT(A)
RDC(mΩ)
Compliance
Bauform
L(µH)
IR(A)
RDC max.(mΩ)
fres(MHz)
Q(%)
P(W)
Muster
WE-FSFS Flexible Ferritfolie, 230, 150
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Komplexe Permeabilität230 
Komplexe Permeabilität150 
Komplexe Permeabilität90 
Länge60 mm
Breite60 mm
Höhe0.2 mm
Oberflächenwiderstand1 GΩ
WE-LQS SMT-Speicherdrossel, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Länge2.5 mm
Breite2 mm
Höhe1.2 mm
Sättigungsstrom0.8 A
Gleichstromwiderstand430 mΩ
Bauform2512 
Induktivität10 µH
Nennstrom0.65 A
Eigenresonanzfrequenz30 MHz
WE-WPCC Wireless Power Transfer Receiver Spule, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Länge28.9 mm
Breite15.7 mm
Höhe0.76 mm
Sättigungsstrom3 A
ComplianceQi - Airfuel Alliance 
Bauform28,9 x 15,7 x 0,76 mm 
Induktivität7.5 µH
Nennstrom1.55 A
Gleichstromwiderstand380 mΩ
Eigenresonanzfrequenz23 MHz
Güte16 %
Leistungsvermögen [1]20 W