IC-Hersteller STMicroelectronics

IC-Hersteller (96)

STMicroelectronics STUSB1702Y | Demoboard AEK-USB-2TYPEC1

Power Delivery dual port interface board with automotive grade TUSB1702Y USB Type-C controller

Details

TopologieSonstige Topologie
IC-Revision1

Beschreibung

The AEK-USB-2TYPEC1 automotive grade USB Type-C and Power Delivery dual port expansion board is part of the ST AutoDevKit development initiative. It embeds two STUSB1702Y USB Type-C™ port controllers for a two-port Provider solution.Each STUSB1702Y USB Type-C port controller includes a fully-featured USB type-C state machine for attach/detach and cable orientation detection, a USB PD PHY and BMC transceiver, high voltage (20 V) technology VBUS voltage monitoring, 600 mA VCONN power switch, VBUS and VCONN discharge paths, 22 V CC line protection, VBUS switch gate drivers and data role configuration (not used in this case).The two USB Type-C ports have USB 2.0 data lines that are accessible through onboard connectors J101 and J102. The same connectors may be used to redirect the data from one of the two USB 2.0 ports to the 4x20 pass-through connector.The board also has a power status LED and three status LEDs to signal what each Type-C port is advertising: power role, VBUS negotiation status and CC line orientation (direct or flipped). Two alternate function connectors (not mounted) are available for extension or future developments.The AEK-USB-2TYPEC1 board is designed to be connected to a SPC58 Chorus 4 MB flash discovery board (SPC58EC-DISP) equipped with a 32-bit Power Architecture® microcontroller for automotive ASIL-B applications. The AEKDUSBTYPEC1 kit consists of two boards and a USB-PD firmware package, so you can develop application based on the USB-PD Provider role.The AEK-USB-2TYPEC1 embeds a connector for an external power board, which would allow the system to deliver output voltage profiles up to 20 V and satisfy various power requests according to the USB Power Delivery specification.

Eigenschaften

  • Both ports acting as Provider role
  • Type-C attach and cable orientation detection
  • High voltage protections on VBUS and CC lines
  • VBUS switch gate drivers
  • VBUS monitoring and discharge path
  • A current sensing circuit for each port on VBUS line
  • Power connector to interface with external power boards (not included)
  • Total board dimensions: 85 mm x 81 mm
  • RoHS compliant

Typische Anwendungen

  • Car charger, car infotainment
  • Smart plugs, wall adapters, and chargers / Power hubs and docking stations / Any Type-C source device

Weiterführende Informationen

Artikeldaten

Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieCTol. CVR
(V (DC))
BauformBetriebstemperaturDF
(%)
RISOKeramiktypL
(mm)
W
(mm)
Fl
(mm)
AnwendungInterface typMontageartIR 1
(A)
Arbeitsspannung
(V (AC))
PinsReihenH
(mm)
G
(mm)
GenderTypIR
(A)
Verpackung Muster
885012206071SPEC
8 Dateien WCAP-CSGP MLCCs 25 V(DC)100 nF ±10% 25 0603 -55 °C up to +125 °C 3.55 GΩ X7R Klasse II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012208094SPEC
8 Dateien WCAP-CSGP MLCCs 50 V(DC)4.7 µF ±10% 50 1206 -55 °C up to +125 °C 100.02 GΩ X7R Klasse II 3.2 1.6 0.5 1.6 7" Tape & Reel
61301821121SPEC
6 Dateien WR-PHD 2.54 mm THT Dual Pin Header -40 °C up to +105 °C1000 MΩ 22.86 THT 250 18 Dual Pin Header Gerade 3 Beutel
632723300011SPEC
6 Dateien WR-COM USB 3.1 Type C Receptacle Horizontal THR / SMT -40 °C up to +105 °C1000 MΩ USB 3.1 Type C THR 20 24 1.9 Receptacle Horizontal 5 Tape and Reel
61300111121SPEC
6 Dateien WR-PHD 2.54 mm THT Pin Header -40 °C up to +105 °C1000 MΩ 2.54 THT 250 1 Single Pin Header Gerade 3 Beutel
61300211121SPEC
6 Dateien WR-PHD 2.54 mm THT Pin Header -40 °C up to +105 °C1000 MΩ 5.08 THT 250 2 Single Pin Header Gerade 3 Beutel
61300311121SPEC
6 Dateien WR-PHD 2.54 mm THT Pin Header -40 °C up to +105 °C1000 MΩ 7.62 THT 250 3 Single Pin Header Gerade 3 Beutel
61300411121SPEC
6 Dateien WR-PHD 2.54 mm THT Pin Header -40 °C up to +105 °C1000 MΩ 10.16 THT 250 4 Single Pin Header Gerade 3 Beutel
61301421121SPEC
6 Dateien WR-PHD 2.54 mm THT Dual Pin Header -40 °C up to +105 °C1000 MΩ 17.78 THT 3 250 14 Dual Pin Header Gerade 3 Beutel
Muster
Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieCTol. CVR
(V (DC))
BauformBetriebstemperaturDF
(%)
RISOKeramiktypL
(mm)
W
(mm)
Fl
(mm)
AnwendungInterface typMontageartIR 1
(A)
Arbeitsspannung
(V (AC))
PinsReihenH
(mm)
G
(mm)
GenderTypIR
(A)
Verpackung Muster