| Topologie | Abwärtswandler |
| Eingangsspannung | 5-12 V |
| Ausgang 1 | 5 V |
| IC-Revision | 3.0 |
The STEVAL-7BIDIRCB is a solution for a 7 kW bidirectional charger, consisting of two stages:1) bidirectional three-channel interleaved totem pole PFC working at fixed frequency in continuous conduction mode (CCM). The three-channel interleaved PFC architecture guarantees the highest efficiency in a wide load range.2) bidirectional resonant full bridge CLLC with synchronous rectification. The CLLC uses frequency modulation to regulate the output.The two stages are digitally controlled by two STM32G474RET6 microcontrollers that are mounted in a single control card.The power stage is fully composed by ST's SiC power MOSFETs, driven by STGAP SiC dedicated gate drivers with galvanic isolation. Thanks to a modular system architecture in combination with the HU3PAK package, a power density of 4 kW/l is achieved.The PFC operates at a switching frequency of 65 kHz and the CLLC operates at variable frequency from 130 kHz to 350 kHz.Thanks to the excellent switching performance of the SiC GEN3 and its Rds(on) temperature stability, a peak efficiency of 97.1 % is achieved in charger mode.The solution is also suitable to implement a solar integrated ESS, thanks to provision for MPPT stage connection.
Open-frame power density: 4 kW/l (66 W/inch3)Cooling: natural air convection
Artikel Nr. | Datenblatt | Simulation | Downloads | Status | Produktserie | λDom typ.(nm) | Farbe | λPeak typ.(nm) | IV typ.(mcd) | VF typ.(V) | Chiptechnologie | 2θ50% typ.(°) | C | Tol. C | VR(V (DC)) | Bauform | Betriebstemperatur | Q(%) | DF(%) | RISO | Keramiktyp | L(mm) | B(mm) | H(mm) | Fl(mm) | Verpackung | L(µH) | IR(A) | ISAT(A) | fres(MHz) | Montageart | Endurance(h) | IRIPPLE(mA) | Z(mΩ) | ILeak(µA) | Ø D(mm) | RESR(Ω) | Muster | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
![]() | WL-SMCD SMT Mono-color Chip LED Diffused, 573 nm, Hellgrün | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWL-SMCD SMT Mono-color Chip LED Diffused | dominante Wellenlänge [typ.]573 nm | FarbeHellgrün | Spitzen-Wellenlänge [typ.]575 nm | Lichtstärke [typ.]60 mcd | Durchlassspannung [typ.]2 V | ChiptechnologieAlInGaP | Abstrahlwinkel Phi 0° [typ.]140 ° | – | – | – | Bauform0603 | Betriebstemperatur -40 °C up to +85 °C | – | – | – | – | Länge1.6 mm | Breite0.8 mm | Höhe0.4 mm | – | VerpackungTape and Reel | – | – | – | – | – | – | – | – | – | – | – | ||||
![]() | WE-TPC SMT-Speicherdrossel, –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWE-TPC SMT-Speicherdrossel | – | – | – | – | – | – | – | – | – | – | Bauform4818 | Betriebstemperatur -40 °C up to +125 °C | – | – | – | – | Länge4.8 mm | Breite4.8 mm | Höhe1.8 mm | – | – | Induktivität6.8 µH | Nennstrom1.5 A | Sättigungsstrom1.25 A | Eigenresonanzfrequenz60 MHz | MontageartSMT | – | – | – | – | – | – | ||||
![]() | WCAP-ASLL Aluminium-Elektrolytkondensatoren, –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-ASLL Aluminium-Elektrolytkondensatoren | – | – | – | – | – | – | – | Kapazität470 µF | Kapazität±20% | Nennspannung25 V (DC) | Bauform10.0 x 10.5 | Betriebstemperatur -55 °C up to +105 °C | – | Verlustfaktor14 % | Isolationswiderstand0.212766 MΩ | – | Länge10.5 mm | Breite10.3 mm | – | – | Verpackung15" Tape & Reel | – | – | – | – | MontageartV-Chip SMT | Endurance 5000 | Rippelstrom670 mA | Impedanz90 mΩ | Leckstrom117.5 µA | Durchmesser10 mm | ESR (Serienersatzwiderstand)0.0835469 Ω | ||||
![]() | WCAP-PSLP Aluminium-Polymer-Kondensatoren, –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-PSLP Aluminium-Polymer-Kondensatoren | – | – | – | – | – | – | – | Kapazität47 µF | Kapazität±20% | Nennspannung10 V (DC) | Bauform5.0 x 5.5 | Betriebstemperatur -55 °C up to +105 °C | – | Verlustfaktor8 % | – | – | Länge5.5 mm | Breite5.3 mm | – | – | Verpackung15" Tape & Reel | – | – | – | – | MontageartV-Chip SMT | Endurance 2000 | Rippelstrom1970 mA | – | Leckstrom300 µA | Durchmesser5 mm | ESR (Serienersatzwiderstand)0.03 Ω | ||||
| WCAP-CSGP MLCCs 50 V(DC), –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-CSGP MLCCs 50 V(DC) | – | – | – | – | – | – | – | Kapazität6.8 pF | Kapazität±0.5pF | Nennspannung50 V (DC) | Bauform0603 | Betriebstemperatur -55 °C up to +125 °C | Güte536 % | – | Isolationswiderstand10 GΩ | KeramiktypNP0 Klasse I | Länge1.6 mm | Breite0.8 mm | Höhe0.8 mm | Pad Dimension0.4 mm | Verpackung7" Tape & Reel | – | – | – | – | – | – | – | – | – | – | – | |||||
| WCAP-CSGP MLCCs 25 V(DC), –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-CSGP MLCCs 25 V(DC) | – | – | – | – | – | – | – | Kapazität470 nF | Kapazität±10% | Nennspannung25 V (DC) | Bauform0603 | Betriebstemperatur -55 °C up to +125 °C | – | Verlustfaktor10 % | Isolationswiderstand1.1 GΩ | KeramiktypX7R Klasse II | Länge1.6 mm | Breite0.8 mm | Höhe0.8 mm | Pad Dimension0.4 mm | Verpackung7" Tape & Reel | – | – | – | – | – | – | – | – | – | – | – | |||||
| WCAP-CSGP MLCCs 50 V(DC), –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-CSGP MLCCs 50 V(DC) | – | – | – | – | – | – | – | Kapazität220 pF | Kapazität±10% | Nennspannung50 V (DC) | Bauform0603 | Betriebstemperatur -55 °C up to +125 °C | – | Verlustfaktor2.5 % | Isolationswiderstand10 GΩ | KeramiktypX7R Klasse II | Länge1.6 mm | Breite0.8 mm | Höhe0.8 mm | Pad Dimension0.4 mm | Verpackung7" Tape & Reel | – | – | – | – | – | – | – | – | – | – | – | |||||
| WCAP-CSGP MLCCs 50 V(DC), –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-CSGP MLCCs 50 V(DC) | – | – | – | – | – | – | – | Kapazität10 nF | Kapazität±10% | Nennspannung50 V (DC) | Bauform0603 | Betriebstemperatur -55 °C up to +125 °C | – | Verlustfaktor2.5 % | Isolationswiderstand10 GΩ | KeramiktypX7R Klasse II | Länge1.6 mm | Breite0.8 mm | Höhe0.8 mm | Pad Dimension0.4 mm | Verpackung7" Tape & Reel | – | – | – | – | – | – | – | – | – | – | – | |||||
| WCAP-CSGP MLCCs 50 V(DC), –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-CSGP MLCCs 50 V(DC) | – | – | – | – | – | – | – | Kapazität68 nF | Kapazität±10% | Nennspannung50 V (DC) | Bauform0603 | Betriebstemperatur -55 °C up to +125 °C | – | Verlustfaktor3 % | Isolationswiderstand7.4 GΩ | KeramiktypX7R Klasse II | Länge1.6 mm | Breite0.8 mm | Höhe0.8 mm | Pad Dimension0.4 mm | Verpackung7" Tape & Reel | – | – | – | – | – | – | – | – | – | – | – | |||||
| WCAP-CSGP MLCCs 50 V(DC), –, – | Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre. | ProduktserieWCAP-CSGP MLCCs 50 V(DC) | – | – | – | – | – | – | – | Kapazität100 nF | Kapazität±10% | Nennspannung50 V (DC) | Bauform0603 | Betriebstemperatur -55 °C up to +125 °C | – | Verlustfaktor3 % | Isolationswiderstand5 GΩ | KeramiktypX7R Klasse II | Länge1.6 mm | Breite0.8 mm | Höhe0.8 mm | Pad Dimension0.4 mm | Verpackung7" Tape & Reel | – | – | – | – | – | – | – | – | – | – | – |