IC-Hersteller Silicontent Technology

IC-Hersteller (96)

Silicontent Technology SCT2433 | Demoboard EV2433-B-01A

3.8V-40V Vin, 3.5A High Efficiency Synchronous Step-down DCDC Converter

Details

TopologieAbwärtswandler
Eingangsspannung3.8-40 V
Ausgang 13.3 V / 3.5 A
IC-Revision0.9

Beschreibung

3.8V-40V Vin, 3.5A High Efficiency Synchronous Step-down DCDC Converter Evaluation Board.The EV2430-B-03A Evaluation Board is designed to demonstrate the capabilities of SCT2430, SCT2431, SCT2432 and SCT2439, high efficiency fully integrated synchronous step-down DCDC converter supporting up to 3.5A continuous output current from an input source from 3.8V to 40V. The SCT2430 SCT2432 and SCT2439 offer adjustable switching frequency ranging from 100kHz to 2.2MHz with internal 4ms soft-start, which provides flexibility to optimize either efficiency or external component size. The SCT2431 features adjustable soft-start with fixed 570KHz switching frequency. Both devices are available in an easy-soldering 8-pin ESOP package.

Eigenschaften

  • Wide Input Range: 3.8V-40V
  • Up to 3.5A Continuous Output Current
  • 0.8V ±1%Feedback Reference Voltage
  • Integrated 80mΩ High-Side Rdson and 50mΩ Low-Side Rdson Power MOSFETs
  • 25uA Low Quiescent Current with Pulse Skipping Mode PSM at Light Load
  • 100KHz to 2.2MHz Adjustable Frequency and External Clock Synchronization (SCT2430, SCT2432, SCT2439)
  • Adjustable Soft-start (SCT2431, SCT2432)
  • Low Dropout Mode Operation
  • Derivable Inverting Voltage Regulator
  • EMI Reduction with Frequency Spread Spectrum FSS
  • Over-voltage and Over Temperature Protection
  • Available in an ESOP-8 Package

Typische Anwendungen

  • Industrial Distributed Power Supplies
  • Optical Communication and Networking System
  • USB Type-C Power Delivery
  • Cigarette Lighter Adapters, USB Chargers
  • Battery Pack Powered System - Cordless Power Tools, Cordless Home Appliance, Drone
  • Automotive System

Artikeldaten

Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieCTol. CVR
(V (DC))
BauformBetriebstemperaturDF
(%)
RISOKeramiktypL
(mm)
W
(mm)
Fl
(mm)
L
(µH)
IRP,40K
(A)
ISAT1
(A)
ISAT,30%
(A)
RDC
(mΩ)
fres
(MHz)
MaterialEndurance
(h)
BetriebstemperaturIRIPPLE
(mA)
ILeak
(µA)
Raster
(mm)
Ø D
(mm)
PinsReihenH
(mm)
GenderTypIR
(A)
Verpackung Muster
885012206077SPEC
8 Dateien WCAP-CSGP MLCCs 50 V(DC)100 pF ±10% 50 0603 -55 °C up to +125 °C 2.510 GΩ X7R Klasse II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012206059SPEC
8 Dateien WCAP-CSGP MLCCs 25 V(DC)1 nF ±10% 25 0603 -55 °C up to +125 °C 3.510 GΩ X7R Klasse II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012206071SPEC
8 Dateien WCAP-CSGP MLCCs 25 V(DC)100 nF ±10% 25 0603 -55 °C up to +125 °C 3.55 GΩ X7R Klasse II 1.6 0.8 0.4 -55 °C bis zu +125 °C 0.8 7" Tape & Reel
885012206095SPEC
8 Dateien WCAP-CSGP MLCCs 50 V(DC)100 nF ±10% 50 0603 -55 °C up to +125 °C 35 GΩ X7R Klasse II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012209048SPEC
8 Dateien WCAP-CSGP MLCCs 50 V(DC)4.7 µF ±10% 50 1210 -55 °C up to +125 °C 50.02 GΩ X7R Klasse II 3.2 2.5 0.6 2.5 7" Tape & Reel
885012109011SPEC
8 Dateien WCAP-CSGP MLCCs 16 V(DC)47 µF ±20% 16 1210 -55 °C up to +85 °C 100.002 GΩ X5R Klasse II 3.2 2.5 0.75 2.5 7" Tape & Reel
860040775006SPEC
7 Dateien WCAP-ATUL Aluminium-Elektrolytkondensatoren100 µF ±20% 63 9 12.5 7000 -40 °C bis zu +105 °C 640 63 5 10 Ammopack
860040575007SPEC
7 Dateien WCAP-ATUL Aluminium-Elektrolytkondensatoren220 µF ±20% 35 12 12.5 7000 -40 °C bis zu +105 °C 1060 77 5 10 Ammopack
744325550SPEC
8 Dateien WE-HCI SMT-Hochstrominduktivität 1050 -40 °C up to +150 °C 10.5 10.2 5.5 12 4.5 12 10.3 30 Superflux -40 °C bis zu +150 °C 2 4.7
61300311121SPEC
6 Dateien WR-PHD 2.54 mm THT Pin Header -40 °C up to +105 °C1000 MΩ 7.62 2.54 3 Single Pin Header Gerade 3 Beutel
Muster
Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieCTol. CVR
(V (DC))
BauformBetriebstemperaturDF
(%)
RISOKeramiktypL
(mm)
W
(mm)
Fl
(mm)
L
(µH)
IRP,40K
(A)
ISAT1
(A)
ISAT,30%
(A)
RDC
(mΩ)
fres
(MHz)
MaterialEndurance
(h)
BetriebstemperaturIRIPPLE
(mA)
ILeak
(µA)
Raster
(mm)
Ø D
(mm)
PinsReihenH
(mm)
GenderTypIR
(A)
Verpackung Muster