IC-Hersteller ROHM

IC-Hersteller (103)

ROHM BM2P129TF

PWM type DC/DC converter IC Integrated Switching MOSFET for non-Isolated type

Details

TopologieAbwärtswandler
Eingangsspannung-0.3-650 V
Schaltfrequenz94-106 kHz
IC-Revision002

Beschreibung

The PWM type DC/DC converter for AC/DC providesan optimum system for all products that include anelectrical outlet. It enables simpler design of a higheffective converter specializing in non-isolated devices.This series has a built-in HV starter circuit thattolerates 650V/800V, and it contributes to low powerconsumption. With a current detection resistor forswitching as internal device, it can be designed assmall power supply. Since current mode control isutilized, current is restricted in each cycle andexcellent performance is demonstrated in bandwidthand transient response. The switching frequency isfixed to 100 kHz. A frequency hopping function is alsoon chip, and it contributes to low EMI. In addition, abuilt-in super junction MOSFET which tolerates650V/800V makes the design easy

Eigenschaften

 PWM frequency: 100kHz PWM current mode method Frequency hopping function Burst operation at light load Built-in 650V/800V start circuit Built-in 650V/800V switching MOSFET VCC pin under voltage protection VCC pin over voltage protection Over current limiter function per cycle Soft start function

Typische Anwendungen

  • http://www.rohm.com/web/global/datasheet/BM2P129TF/bm2p139tf-e
  • Air conditioners/ cleaners

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
L(µH)
IR(A)
ISAT(A)
RDC max.(mΩ)
fres(MHz)
Montageart
C
VR(V (DC))
Endurance(h)
IRIPPLE(mA)
ILeak(µA)
DF(%)
Raster(mm)
Ø D(mm)
L(mm)
Verpackung
Muster
WE-TIS Tonneninduktivität, 220 µH, 1 A
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Induktivität220 µH
Nennstrom1 A
Sättigungsstrom1.4 A
Gleichstromwiderstand510 mΩ
Eigenresonanzfrequenz2.6 MHz
MontageartTHT 
Länge11 mm
WCAP-ATG5 Aluminium-Elektrolytkondensatoren, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität4.7 µF
Nennspannung400 V (DC)
Endurance 2000
Rippelstrom48 mA
Leckstrom56.4 µA
Verlustfaktor15 %
Raster3.5 mm
Durchmesser8 mm
Länge11.5 mm
VerpackungAmmopack 
WCAP-ATLI Aluminium-Elektrolytkondensatoren, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität220 µF
Nennspannung25 V (DC)
Endurance 3000
Rippelstrom750 mA
Leckstrom55 µA
Verlustfaktor10 %
Raster3.5 mm
Durchmesser8 mm
Länge11.5 mm
VerpackungAmmopack