IC-Hersteller Renesas

IC-Hersteller (104)

Renesas ISL91211B | Demoboard ISL91211BIK-REF2Z

Quad Output Power Management IC

Details

TopologieAbwärtswandler
Eingangsspannung5 V
Schaltfrequenz2000-6000 kHz
Ausgang 13.3 V / 3 A
Ausgang 22.5 V / 3 A
Ausgang 31.8 V / 3 A
IC-Revision1.0

Beschreibung

The ISL91211A is a 4-phase, three output programmable Power Management IC (PMIC) and the ISL91211B is a 4-phase, four output programmable PMIC. They are optimized with highly efficient synchronous buck converters capable of multiphase and single-phase operations that can deliver up to 5A per phase continuous output current. It features four buck controllers and has the capability to reconfigure its power stages to these controllers. This flexibility allows seamless design-in for a wide range of applications that require high output power and small solution size.ISL91211A and ISL91211B integrate low ON-resistance MOSFETs and programmable PWM frequency, allowing the use of very small external inductors and capacitors. They feature automatic Diode Emulation and Pulse Skipping modes under light-load conditions to further improve efficiency and maximize battery life. The ISL91211A and ISL91211B deliver a highly robust power solution by featuring a controller based on the Renesas proprietary R5 Technology that provides tight output accuracy and load regulation, ultra-fast transient response, seamless DCM/CCM transitions, and requires no external compensation.In addition to the standard interrupt, chip enable, and watchdog reset functions, ISL91211A and ISL91211B also feature four MPIOs and three GPIOs capable of supporting SPI, I2C communication protocol, and various other pin mode functions.

Eigenschaften

  • Triple output 2+1+1 phases (ISL91211A) or quad output single phase (ISL91211B)
  • 2.5V to 5.5V supply voltage
  • 5A per phase output current capability
  • Small solution size (for four phase design)
  • High efficiency (94.7% for 3.8VIN/1.8VOUT)
  • Low IQ in low power mode
  • Proprietary control scheme reduces output capacitor and supports fast load transient (such as 50A/µs per phase)
  • ±0.7% system accuracy, remote voltage sensing
  • Programmable PWM frequency from 2MHz to 6MHz
  • I2C programmable output from 0.3V to 2V
  • Independent Dynamic Voltage Scaling (DVS) for each output
  • Soft-start and fault detection (UV, OV, OC, OT), short-circuit protection
  • 2.551mmx3.67mm 54 ball WLCSP with 0.4mm pin pitch

Typische Anwendungen

  • Smartphones, AR/VR Glasses, Drones
  • Artificial Intelligence (AI) Processors / Client/Enterprise/Data Center SSD, NAS
  • Optical Transceiver Modules

Weiterführende Informationen

Artikeldaten

Jetzt einloggen, um Verfügbarkeiten zu sehen und Verfügbarkeitsprognosen anzufragen. LOGIN
Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
Pins
PCB/Kabel/Panel
Modularity
Typ
Wire Section
C
Tol. C
VR(V (DC))
Bauform
Betriebstemperatur
Q
RISO
Keramiktyp
L(mm)
B(mm)
H(mm)
Fl(mm)
Verpackung
L(µH)
IRP,40K(A)
ISAT,10%(A)
ISAT,30%(A)
RDC max.(mΩ)
fres(MHz)
Montageart
MusterVerfügbarkeit & Muster
Jetzt einloggen, um Verfügbarkeiten zu sehen und Verfügbarkeitsprognosen anzufragen. LOGIN
SPECWE-LHMI SMT Speicherdrossel, 2, –
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins
Bauform4020 
Betriebstemperatur -40 °C up to +125 °C
Länge4.45 mm
Breite4.06 mm
Höhe1.8 mm
Induktivität2.2 µH
Performance Nennstrom4.05 A
Sättigungsstrom 14.45 A
Sättigungsstrom @ 30%8.4 A
Gleichstromwiderstand61 mΩ
Eigenresonanzfrequenz49 MHz
MontageartSMT 
Verfügbarkeit prüfen
SPECWE-LHMI SMT Speicherdrossel, 2, –
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins
Bauform4020 
Betriebstemperatur -40 °C up to +125 °C
Länge4.45 mm
Breite4.06 mm
Höhe1.8 mm
Induktivität3.3 µH
Performance Nennstrom3.5 A
Sättigungsstrom 12.75 A
Sättigungsstrom @ 30%5.45 A
Gleichstromwiderstand76 mΩ
Eigenresonanzfrequenz40 MHz
MontageartSMT 
Verfügbarkeit prüfen
SPECWR-TBL Series 102 - 5.00 mm Horizontal Entry Modular, 2, Kabelschutzprinzip
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Pins
PCB/Kabel/PanelPCB 
ModularityJa 
TypHorizontal 
Wire Section 22 to 14 (AWG) 0.75 to 1.5 (mm²)
Betriebstemperatur -40 °C up to +105 °C
Länge10 mm
Höhe10 mm
VerpackungKarton 
MontageartTHT 
Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 10 V(DC), –, –
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität22 pF
Kapazität±5% 
Nennspannung10 V (DC)
Bauform0603 
Betriebstemperatur -55 °C up to +125 °C
Güte840 
Isolationswiderstand10 GΩ
KeramiktypNP0 Klasse I 
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
Verpackung7" Tape & Reel 
Verfügbarkeit prüfen