IC-Hersteller Qorvo

IC-Hersteller (96)

Qorvo ACT2861 | Demoboard EVK402

30V Buck-Boost Charger with Integrated MOSFETs and OTG

Details

TopologieAbwärts- und Aufwärtswandler
Eingangsspannung4-29 V
Schaltfrequenz125-1000 kHz

Beschreibung

The ACT2861 is a buck-boost charger with 4 integrated MOSFETs. It offers a high efficiency, low component count, compact solution for 2 to 5 cell battery charging application. It operates from an input voltage range from 4 to 29V. An advanced switch control algorithm allows the buck-boost converter to maintain output voltage regulation with input voltages that are above, below or equal to the output voltage. The ACT2861 is optimized to reduce input current in shipping, shutdown, and standby for applications which are sensitive to quiescent current draw, such as battery-powered devices. The system can be monitored and configured by I²C. The built-in ADC can be read for the information of input/output voltages and currents, and the die temperature. With an MCU, it can easily be configured to charge a multi cell battery pack from a variety of input power sources.

Eigenschaften

  • Wide VIN Range: 3.9V to 29V (No Dead Zone)
  • Supports 2 to 5 Cell Lithium-ion Batteries
  • Supports OTG Function (5V ~ 22.5V Input) with wide range of output voltages
  • OTG output supports QC3.0 / USB PD + PPS output levels and transition times
  • Programmable Frequency: 125KHz, 250KHz, 500kHz, and 1MHz
  • 2V ~ 5V/100mA Programmable Output LDO
  • Precision 0.5% Voltage Reference
  • +/-4% Output Constant Current Regulation
  • < 5 μA Leakage Current from Battery in Shipping Mode
  • Programmable Charge Voltage via I2C
  • Programmable Charge Current via Pin and I2C
  • Programmable Soft-Start
  • Programmable Safety Timer
  • Battery Path Impedance Compensation
  • JEITA Compliant
  • Cycle-by-Cycle Current Limit
  • Built in ADC for Temperature, Input and Output Voltage and Current monitoring
  • Thermal Regulation and Protection
  • 25mΩ FET from VIN to SW1
  • 25mΩ FET from SW2 to VOUT
  • 35mΩ FET from SW1 to PGND
  • 35mΩ FET from SW2 to PGND
  • Low Output Ripple
  • Thermally Enhanced 32-Lead 4mx4mm QFN

Typische Anwendungen

  • Solar Powered Devices
  • Solid-State Lighting
  • Portable Battery-Powered Devices
  • Car Charger / 24V Industrial Applications / Multiple Power Source Supplies /DC UPS
  • Multi Cell Battery Charger / Power Bank
  • Automotive Power Systems

Weiterführende Informationen

Artikeldaten

Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieAnwendungPCB/Kabel/PanelModularityWire SectionλDom typ.
(nm)
FarbeλPeak typ.
(nm)
IV typ.
(mcd)
VF typ.
(V)
Chiptechnologie50% typ.
(°)
CTol. CVR
(V (DC))
BauformBetriebstemperaturDF
(%)
RISOKeramiktypL
(mm)
W
(mm)
Fl
(mm)
L
(µH)
IRP,40K
(A)
ISAT1
(A)
ISAT,30%
(A)
RDC max.
(mΩ)
fres
(MHz)
MontageartEndurance
(h)
BetriebstemperaturIRIPPLE
(mA)
ILeak
(µA)
Raster
(mm)
Ø D
(mm)
H
(mm)
Betätigungskraft (Value)
(g)
Elektrische Lebensdauer
(Cycles)
Actuator-FarbeDampfphasenprozessPinsReihenGenderTypIR
(A)
VerpackungFarbe Muster
691214110002SSPEC
6 Dateien WR-TBL Series 2141S - 3.50 mm Horizontal Entry Modular w. Rising Cage Clamp Rising Cage Clamp PCB Ja 30 to 16 (AWG) 0.05 to 1.31 (mm²) -30 °C up to +120 °C 7 THT -30 °C bis zu +120 °C 3.5 2 Horizontal 10 Karton
150060VS75000SPEC
6 Dateien WL-SMCW SMT Mono-color Chip LED Waterclear 570 Hellgrün 572 40 2 AlInGaP 140 0603 -40 °C up to +85 °C 1.6 0.8 SMT -40 °C up to +85 °C 0.7 Tape and Reel
860010675020SPEC
7 Dateien WCAP-ATG8 Aluminium-Elektrolytkondensatoren470 µF ±20% 50 10 20 2000 -40 °C bis zu +85 °C 828 235 5 10 Ammopack
885012206020SPEC
8 Dateien WCAP-CSGP MLCCs 10 V(DC)100 nF ±10% 10 0603 -55 °C up to +125 °C 55 GΩ X7R Klasse II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012206026SPEC
8 Dateien WCAP-CSGP MLCCs 10 V(DC)1 µF ±10% 10 0603 -55 °C up to +125 °C 100.1 GΩ X7R Klasse II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012206075SPEC
8 Dateien WCAP-CSGP MLCCs 25 V(DC)470 nF ±10% 25 0603 -55 °C up to +125 °C 101.1 GΩ X7R Klasse II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012206093SPEC
8 Dateien WCAP-CSGP MLCCs 50 V(DC)47 nF ±10% 50 0603 -55 °C up to +125 °C 310 GΩ X7R Klasse II 1.6 0.8 0.4 0.8 7" Tape & Reel
430481035816SPEC
6 Dateien WS-TASV SMT Washable Tact Switch 6x6 mm 12 -40 °C up to +85 °C100 MΩ 3.5 160 1000000 Schwarz nicht spezifiziert 0.05 Tape and Reel
60900213421SPEC
3 Dateien WR-PHD 2.54 mm Multi-Jumper Jumper with Test Point -40 °C up to +125 °C1000 MΩ 2.44 2.54 1 Jumper 3 Beutel Schwarz
61300111121SPEC
6 Dateien WR-PHD 2.54 mm THT Pin Header -40 °C up to +105 °C1000 MΩ 2.54 THT 2.54 1 Single Pin Header Gerade 3 Beutel
61300211121SPEC
6 Dateien WR-PHD 2.54 mm THT Pin Header -40 °C up to +105 °C1000 MΩ 5.08 THT 2.54 2 Single Pin Header Gerade 3 Beutel
61300311121SPEC
6 Dateien WR-PHD 2.54 mm THT Pin Header -40 °C up to +105 °C1000 MΩ 7.62 THT 2.54 3 Single Pin Header Gerade 3 Beutel
744373965220SPEC
8 Dateien WE-LHMI SMT Speicherdrossel 1365 -40 °C up to +125 °C 13.65 12.5 22 6.5 6.7 13.9 37 5.4 SMT 6.2
Muster
Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieAnwendungPCB/Kabel/PanelModularityWire SectionλDom typ.
(nm)
FarbeλPeak typ.
(nm)
IV typ.
(mcd)
VF typ.
(V)
Chiptechnologie50% typ.
(°)
CTol. CVR
(V (DC))
BauformBetriebstemperaturDF
(%)
RISOKeramiktypL
(mm)
W
(mm)
Fl
(mm)
L
(µH)
IRP,40K
(A)
ISAT1
(A)
ISAT,30%
(A)
RDC max.
(mΩ)
fres
(MHz)
MontageartEndurance
(h)
BetriebstemperaturIRIPPLE
(mA)
ILeak
(µA)
Raster
(mm)
Ø D
(mm)
H
(mm)
Betätigungskraft (Value)
(g)
Elektrische Lebensdauer
(Cycles)
Actuator-FarbeDampfphasenprozessPinsReihenGenderTypIR
(A)
VerpackungFarbe Muster