NXP FXLS9 and FXPS7 | Demoboard SEN-GEN6-SKT

Beschreibung

The FXLS9xxxx is a dual channel DSI3, PSI5, SPI, and I2C compatible lateral (X-axis or Y-axis) or vertical (Z-axis) inertial sensor.

Eigenschaften

• Independent X-axis, Y-axis, or Z-axis ranges for each channel
• Medium g ranges from ± 15.5 g to ± 150 g nominal full-scale range
• High g ranges from ± 50 g to ± 500 g nominal full-scale range
• –40 °C to 125 °C operating temperature range
• DSI3 compatible
• Discovery mode for physical location identification
• High side bus switch output driver
• Command and response mode support for device configuration
• Periodic data collection mode support for sensor data transfers.
• Background diagnostic mode support during periodic data collection mode
• PSI5 Version 2.1 compatible
• Compatible modes:
• P10P-500/3L – P10P-500/4H
• A10P-228/1L – P10CRC-xxx/xx
• P16CRC-xxx/xx
• and many others
• Programmable time slots with 1 µs resolution
• Selectable baud rate: 125 kBd or 189 kBd
• 10- and 16-bit data options
• Selectable error detection: even parity, or 3-bit CRC
• Optional daisy chain with external low side switch
• Two-wire programming mode
• 32-bit SPI compatible serial interface
• 3.3 V or 5 V single supply operation
• Register read and write commands
• Sensor data transmission commands
• 12-bit data, left justified in a 16-bit data field
• Command echo with 3-bit source identification
• 2-bit basic status and 2-bit detailed status fields
• 8-bit CRC

Typische Anwendungen

• Airbag,Collision/Crash detection, Active suspension vibration monitoring.
• Machine condition monitoring

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers