Monolithic Power Systems MP28128

Beschreibung

The MP28128 is a 1.5MHz fixed frequency PWM synchronous step-down regulator with internal compensation. MP28128 operates from a 2.7V to 6V input and generates an adjustable output voltage from 0.8V to 0.9xVIN at up to 2.5A load current.

The MP28128 integrates an 80mΩ high-side switch and a 60mΩ synchronous rectifier for high efficiency without an external Schottky diode. With peak current mode control and internal compensation, the MP28128 basedsolution delivers a very compact footprint with a minimum component count. Fault condition protection includes hiccup short-circuit protection, cycle-by-cycle current limiting and thermal shutdown. Other features includefrequency synchronization input, internal softstart and power good output.

The MP28128 is available in a small 3mm x 3mm 10-lead QFN package.

Eigenschaften

• 2.5A Output Current
• Input Operation Range: 2.7V to 6V
• 1.5% Output Accuracy
• Internal Power MOSFET Switches
• All Ceramic Capacitor Design
• 1.5MHz Fixed Switching Frequency
• Internal Soft-Start
• Frequency Synchronization Input
• Power Good Output
• Cycle-by-Cycle Current Limiting
• Thermal Shutdown
• 3mm x 3mm 10-lead QFN Package

Typische Anwendungen

• Telecom Equipment
• µP/ASIC/DSP/FPGA Core and I/O Supplies
• Point of Load Regulators
• Printers
• LCD TVs
• Network Equipment

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers