IC-Hersteller Microchip

IC-Hersteller (103)

Microchip MCP1642B | Demoboard ADM00556

MCP1642B Two-Cells to USB Power Evaluation Board

Details

TopologieAufwärtswandler
Eingangsspannung1.8-3.6 V
Ausgang 15 V / 0.7 A
IC-RevisionA

Beschreibung

The MCP1642B Two-Cells to USB Power Evaluation Board is used to evaluate and demonstrate Microchip Technology’s MCP1642B Switching Boost Regulator. This board demonstrates the MCP1642B capabilities in a boost-converter application supplied from two AA batteries or from an external voltage source. A USB cable can be connected to the output of MCP1642B Two-Cells to USB Power Evaluation Board and used to provide power to portable electronic devices when necessary. It can be used to evaluate the MSOP-8 package. The MCP1642B Two-Cells to USB Power Evaluation Board was developed to help engineers reduce the product design cycle time. On the MCP1642B Two-Cells to USB Power Evaluation Board, the output voltage has the value of 5.0V (the fixed value MCP1642B-50 device is used), resulting in a simple and compact application. The footprints for RT and RB (resistor divider connected to the FB pin) are not populated and will only be used if MCP1642B-ADJ, the adjustable option, will be tested. An enable (EN Switch selection) is used to enable and disable the converter. When enabled, the MCP1642B will regulate the output voltage; when disabled, the MCP1642B will disconnect the path from input to output for “true-disconnect”

Eigenschaften

  • It can be powered by two AA batteries or external power supply
  • Input voltage range (V IN ): 1.8V to 5.5V, with V IN  V OUT
  • Minimum start-up voltage: 1.8V at V OUT = 5.0V and I OUT = 1 mA, resistive load
  • Output voltage: 5.0V
  • Output current: typical 700 mA @ 5V output, 2.8V input
  • PWM operation
  • PWM switching frequency: 1 MHz
  • Power Good indicator 2 mA LED
  • Enable state selectable using EN switch
  • Peak input current limit of 1.8A
  • Overtemperature protection (if the die temperature exceeds +150°C, with 35°C hysteresis)
  • USB A output connector

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
λDom typ.(nm)
Farbe
λPeak typ.(nm)
IV typ.(mcd)
VF typ.(V)
Chiptechnologie
50% typ.(°)
Interface typ
Typ
Gender
Pins
Montageart
IR(mA)
Arbeitsspannung(V (AC))
Verpackung
Poles
L(mm)
Dampfphasenprozess
Muster
WL-SMCW SMT Mono-color Chip LED Waterclear, 625 nm, Rot
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
dominante Wellenlänge [typ.]625 nm
FarbeRot 
Spitzen-Wellenlänge [typ.]630 nm
Lichtstärke [typ.]250 mcd
Durchlassspannung [typ.]2 V
ChiptechnologieAlInGaP 
Abstrahlwinkel Phi 0° [typ.]140 °
MontageartSMT 
VerpackungTape and Reel 
Länge1.6 mm
WS-DISV Small Compact SMT with Raised Actuator 2.54 mm, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Nennstrom25 mA
VerpackungTape and Reel 
Poles
Länge3.48 mm
Dampfphasenprozessnicht spezifiziert 
WR-USB Standard Connectors, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Interface typType A 
TypHorizontal 
GenderBuchse 
Pins
MontageartSMT 
Nennstrom1500 mA
Arbeitsspannung30 V (AC)
VerpackungTray