IC-Hersteller MaxLinear

IC-Hersteller (103)

MaxLinear XRP7714

Quad Channel Digital PWM Step Down Controller

Details

TopologieAbwärtswandler
Eingangsspannung5.5-24 V
Schaltfrequenz300-1500 kHz
Ausgang 11 V
Ausgang 21.5 V
Ausgang 32.5 V
Ausgang 41.8 V
IC-Revision1.1.6

Beschreibung

The XRP7714 is a quad-output pulse-width modulated (PWM) step-down DC-DC controller with a built-in LDO for standby power and GPIOs. The device provides a complete power management solution in one IC and is fully programmable via an I2C serial interface. Independent Digital Pulse Width Modulator (DPWM) channels regulate output voltages and provide all required protection functions such as current limiting and over-voltage protection.

Each output voltage can be programmed from 0.9V to 5.1V without the need of an external voltage divider. The wide range of the programmable DPWM switching frequency (from 300 KHz to 1.5 MHz) enables the user to optimize between efficiency and component size. Input voltage range is from 4.75V to 25V. An I2C bus interface is provided to program the IC as well as to communicate with the host for fault reporting and handling, power rail parameters monitoring, etc.

The device offers a complete solution including independently programmable: soft-start, soft-stop, start-up delay and ramp of each PWM regulator.

The Exar Model XRP77xxEVB-XCM and XRP77xxEVB-XPM ("Evaluation Board") provides designers with a simple, quick and inexpensive means of evaluating and prototyping new designs using PowerXR devices. This Evaluation Board is designed only for low volume engineering purposes; not production volumes. For production requirements commercial programmers must be used. The Evaluation Board is provided “as is and whereas” and without any warranty as to results, merchantability or purpose. Exar is not responsible for misuse of the Evaluation Board.

Eigenschaften

  • 4 Channel Step Down ControllerProgrammable OutputVoltage 0.9V-5.1VProgrammable1 .5MHz DPWM FrequencyIntegrated FET Drivers
  • 4.75V to 5.5V and 5.5V to 25V InputVoltage Range
  • Up to 6 Reconfigurable GPIO PinsFully Programmable via I2C Interface
  • Independent Digital Pulse WidthModulator (DPWM) channels
  • Complete Monitoring and Reporting
  • Complete Power Up/Down Sequencing
  • Full On Board ProtectionOTP, UVLO, OCP and OVP
  • Built-in 3.3V/5V LDO
  • PowerArchitect™ Design Software
  • Green/Halogen Free 40-pin TQFN

Typische Anwendungen

  • Multi Channel Power Supplies
  • Industrial & Telecom Equipments
  • Video Equipments
  • Audio Equipments
  • Processors & DSPs Based Equipments

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
L(µH)
IRP,40K(A)
ISAT,10%(A)
ISAT,30%(A)
RDC(mΩ)
fres(MHz)
Material
VPE
RDC max.(mΩ)
Montageart
Pins
Typ
L(mm)
H(mm)
IR(A)
Arbeitsspannung(V (AC))
Betriebstemperatur
MusterVerfügbarkeit & Muster
SPECWE-HCI SMT-Hochstrominduktivität, 1.5 µH, 9.6 A
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Induktivität1.5 µH
Performance Nennstrom9.6 A
Sättigungsstrom 14.75 A
Sättigungsstrom @ 30%12 A
Gleichstromwiderstand12.7 mΩ
Eigenresonanzfrequenz80 MHz
MaterialSuperflux 
Verpackungseinheit1500 
Gleichstromwiderstand13.97 mΩ
MontageartSMT 
Pins
Länge7 mm
Höhe3 mm
Betriebstemperatur -40 °C up to +150 °C
Verfügbarkeit prüfen
SPECWE-LHMI SMT Speicherdrossel, 2.2 µH, 7.7 A
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Induktivität2.2 µH
Performance Nennstrom7.7 A
Sättigungsstrom 110 A
Sättigungsstrom @ 30%19.1 A
Eigenresonanzfrequenz32 MHz
Verpackungseinheit1000 
Gleichstromwiderstand20 mΩ
MontageartSMT 
Länge7.3 mm
Höhe2.8 mm
Betriebstemperatur -40 °C up to +125 °C
Verfügbarkeit prüfen
SPECWE-LHMI SMT Speicherdrossel, 6.8 µH, 4.45 A
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Induktivität6.8 µH
Performance Nennstrom4.45 A
Sättigungsstrom 15.45 A
Sättigungsstrom @ 30%10.6 A
Eigenresonanzfrequenz18 MHz
Verpackungseinheit1000 
Gleichstromwiderstand60 mΩ
MontageartSMT 
Länge7.3 mm
Höhe2.8 mm
Betriebstemperatur -40 °C up to +125 °C
Verfügbarkeit prüfen
SPECWR-PHD Stiftleisten - Einreihig, –, –
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
MontageartTHT 
Pins
TypGerade 
Länge5.08 mm
Nennstrom3 A
Arbeitsspannung250 V (AC)
Betriebstemperatur -40 °C up to +105 °C
Verfügbarkeit prüfen
SPECWR-PHD Stiftleisten - Einreihig, –, –
Simu­lation
Verfügbarkeit
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
MontageartTHT 
Pins
TypGerade 
Länge7.62 mm
Nennstrom3 A
Arbeitsspannung250 V (AC)
Betriebstemperatur -40 °C up to +105 °C
Verfügbarkeit prüfen