IC-Hersteller Infineon Technologies

IC-Hersteller (107)

Infineon Technologies IM393-M6 | Demoboard EVAL-M1-CTE610N3

EVAL-M1-CTE610N3 User Manual iMOTION™ Modular Application Design Kit

Details

TopologieSonstige Topologie
Eingangsspannung160-265 V
IC-Revision1.0

Beschreibung

This user manual provides an overview of the evaluation board EVAL-M1-CTE610N3 including its main features, key data, pin assignments and mechanical dimensions. EVAL-M1-CTE610N3 is an evaluation board as part of the iMOTION™ Modular Application Design Kit. This power board including a 3-phase CIPOS™ Tiny Intelligent Power Module (IPM) for motor drive application. In combination with the control board equipped with the M1 20pin interface connector such as EVAL-M1-101T, it features and demonstrates Infineon’s CIPOS™ Tiny IPM technology and Advanced Motion Control Engine (MCE 2.0) technology for permanent magnet motors drive over the full speed range. This evaluation board EVAL-M1-CTE610N3 was developed to support customers during their first steps designing applications with CIPOS™ Tiny IPM and running any permanent magnet motor via sensorless sinusoidal control.

Weiterführende Informationen

Von Infineon Technologies freigegebene Bauteile

Jetzt einloggen, um Verfügbarkeiten zu sehen und Verfügbarkeitsprognosen anzufragen. LOGIN
Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
C
Tol. C
VR(V (DC))
Bauform
Qmin.
DF(%)
RISO
Keramiktyp
L(mm)
B(mm)
H(mm)
Fl(mm)
Verpackung
Betriebstemperatur
Q
L(µH)
IR(A)
ISAT(A)
RDC max.(Ω)
fres(MHz)
Endurance(h)
IRIPPLE(mA)
ILeak(µA)
Raster(mm)
Ø D(mm)
MusterVerfügbarkeit & Muster
Jetzt einloggen, um Verfügbarkeiten zu sehen und Verfügbarkeitsprognosen anzufragen. LOGIN
SPECWCAP-CSGP MLCCs 16 V(DC), 470 pF, ±10%
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität470 pF
Kapazität±10% 
Nennspannung16 V (DC)
Bauform0805 
Güte [1]600 
Verlustfaktor3.5 %
Isolationswiderstand10 GΩ
KeramiktypX7R Klasse II 
Länge2 mm
Breite1.25 mm
Höhe0.8 mm
Pad Dimension0.5 mm
Verpackung7" Tape & Reel 
Betriebstemperatur -55 °C up to +125 °C
Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 16 V(DC), 1 nF, ±10%
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität1 nF
Kapazität±10% 
Nennspannung16 V (DC)
Bauform0603 
Güte [1]600 
Verlustfaktor3.5 %
Isolationswiderstand10 GΩ
KeramiktypX7R Klasse II 
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
Verpackung7" Tape & Reel 
Betriebstemperatur -55 °C up to +125 °C
Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 16 V(DC), 1 nF, ±10%
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität1 nF
Kapazität±10% 
Nennspannung16 V (DC)
Bauform0805 
Güte [1]600 
Verlustfaktor3.5 %
Isolationswiderstand10 GΩ
KeramiktypX7R Klasse II 
Länge2 mm
Breite1.25 mm
Höhe0.8 mm
Pad Dimension0.5 mm
Verpackung7" Tape & Reel 
Betriebstemperatur -55 °C up to +125 °C
Verfügbarkeit prüfen
SPECWCAP-CSMH Mid and High Voltage, 1 nF, ±10%
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität1 nF
Kapazität±10% 
Nennspannung630 V (DC)
Bauform1206 
Verlustfaktor2.5 %
Isolationswiderstand10 GΩ
KeramiktypX7R Klasse II 
Länge3.2 mm
Breite1.6 mm
Höhe1.25 mm
Pad Dimension0.6 mm
Verpackung7" Tape & Reel 
Betriebstemperatur -55 °C up to +125 °C
Güte600 
Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 16 V(DC), 2.2 nF, ±10%
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität2.2 nF
Kapazität±10% 
Nennspannung16 V (DC)
Bauform0805 
Güte [1]600 
Verlustfaktor3.5 %
Isolationswiderstand10 GΩ
KeramiktypX7R Klasse II 
Länge2 mm
Breite1.25 mm
Höhe0.8 mm
Pad Dimension0.5 mm
Verpackung7" Tape & Reel 
Betriebstemperatur -55 °C up to +125 °C
Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 16 V(DC), 4.7 nF, ±10%
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität4.7 nF
Kapazität±10% 
Nennspannung16 V (DC)
Bauform0805 
Güte [1]600 
Verlustfaktor3.5 %
Isolationswiderstand10 GΩ
KeramiktypX7R Klasse II 
Länge2 mm
Breite1.25 mm
Höhe0.8 mm
Pad Dimension0.5 mm
Verpackung7" Tape & Reel 
Betriebstemperatur -55 °C up to +125 °C
Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 100 V(DC), 4.7 nF, ±10%
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität4.7 nF
Kapazität±10% 
Nennspannung100 V (DC)
Bauform1206 
Güte [1]600 
Verlustfaktor2.5 %
Isolationswiderstand10 GΩ
KeramiktypX7R Klasse II 
Länge3.2 mm
Breite1.6 mm
Höhe0.8 mm
Pad Dimension0.6 mm
Verpackung7" Tape & Reel 
Betriebstemperatur -55 °C up to +125 °C
Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 16 V(DC), 100 nF, ±10%
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität100 nF
Kapazität±10% 
Nennspannung16 V (DC)
Bauform0603 
Güte [1]600 
Verlustfaktor3.5 %
Isolationswiderstand5 GΩ
KeramiktypX7R Klasse II 
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
Verpackung7" Tape & Reel 
Betriebstemperatur -55 °C up to +125 °C
Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 25 V(DC), 100 nF, ±10%
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität100 nF
Kapazität±10% 
Nennspannung25 V (DC)
Bauform0805 
Güte [1]600 
Verlustfaktor3.5 %
Isolationswiderstand5 GΩ
KeramiktypX7R Klasse II 
Länge2 mm
Breite1.25 mm
Höhe0.8 mm
Pad Dimension0.5 mm
Verpackung7" Tape & Reel 
Betriebstemperatur -55 °C up to +125 °C
Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 16 V(DC), 220 nF, ±10%
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität220 nF
Kapazität±10% 
Nennspannung16 V (DC)
Bauform0603 
Güte [1]600 
Verlustfaktor5 %
Isolationswiderstand2.3 GΩ
KeramiktypX7R Klasse II 
Länge1.6 mm
Breite0.8 mm
Höhe0.8 mm
Pad Dimension0.4 mm
Verpackung7" Tape & Reel 
Betriebstemperatur -55 °C up to +125 °C
Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 16 V(DC), 1 µF, ±10%
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität1 µF
Kapazität±10% 
Nennspannung16 V (DC)
Bauform0805 
Güte [1]600 
Verlustfaktor5 %
Isolationswiderstand0.5 GΩ
KeramiktypX7R Klasse II 
Länge2 mm
Breite1.25 mm
Höhe1.25 mm
Pad Dimension0.5 mm
Verpackung7" Tape & Reel 
Betriebstemperatur -55 °C up to +125 °C
Verfügbarkeit prüfen
SPECWCAP-CSGP MLCCs 16 V(DC), 10 µF, ±20%
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität10 µF
Kapazität±20% 
Nennspannung16 V (DC)
Bauform0805 
Güte [1]600 
Verlustfaktor10 %
Isolationswiderstand0.01 GΩ
KeramiktypX5R Klasse II 
Länge2 mm
Breite1.25 mm
Höhe1.25 mm
Pad Dimension0.5 mm
Verpackung7" Tape & Reel 
Betriebstemperatur -55 °C up to +85 °C
Verfügbarkeit prüfen
SPECWCAP-ATG8 Aluminium-Elektrolytkondensatoren, 100 µF, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität100 µF
Nennspannung16 V (DC)
Verlustfaktor16 %
Länge11 mm
VerpackungAmmopack 
Endurance 2000
Rippelstrom176 mA
Leckstrom16 µA
Raster2 mm
Durchmesser5 mm
Verfügbarkeit prüfen
SPECWCAP-AT1H Aluminium-Elektrolytkondensatoren, 100 µF, ±20%
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität100 µF
Kapazität±20% 
Nennspannung16 V (DC)
Verlustfaktor16 %
Länge11.5 mm
VerpackungAmmopack 
Endurance 8000
Rippelstrom245 mA
Leckstrom16 µA
Raster3.5 mm
Durchmesser8 mm
Verfügbarkeit prüfen
SPECWCAP-ATLI Aluminium-Elektrolytkondensatoren, 220 µF, ±20%
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität220 µF
Kapazität±20% 
Nennspannung16 V (DC)
Verlustfaktor12 %
Länge11.5 mm
VerpackungAmmopack 
Endurance 3000
Rippelstrom575 mA
Leckstrom35.2 µA
Raster3.5 mm
Durchmesser8 mm
Verfügbarkeit prüfen
SPECWCAP-ATG5 Aluminium-Elektrolytkondensatoren, 330 µF, ±20%
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität330 µF
Kapazität±20% 
Nennspannung25 V (DC)
Verlustfaktor14 %
Länge11.5 mm
VerpackungAmmopack 
Endurance 2000
Rippelstrom310 mA
Leckstrom82.5 µA
Raster3.5 mm
Durchmesser8 mm
Verfügbarkeit prüfen
SPECWE-PD2 SMT-Speicherdrossel, –, –
Simu­lation
Verfügbarkeit
Status
AktivProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
iProduktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Bauform5848 
Länge5.2 mm
Breite5.8 mm
Höhe4.5 mm
Betriebstemperatur -40 °C up to +125 °C
Induktivität2.7 µH
Nennstrom4 A
Sättigungsstrom8 A
Gleichstromwiderstand0.045 Ω
Eigenresonanzfrequenz50 MHz
Verfügbarkeit prüfen