IC-Hersteller Infineon Technologies

IC-Hersteller (96)

Infineon Technologies IFX91041EJV33 | Demoboard EVAL_4KVA_230VAC_5LINV

5-level flying capacitor active neutral point clamped inverter design based on 150V OptiMOS™ 5

Details

TopologieInverswandler
Eingangsspannung380-420 V
Ausgang 1230 V
IC-Revision1.0

Beschreibung

The EVAL_4kVA_230VAC_5LINV 5-level active neutral point clamped flying capacitor (ANPC-FC) inverter evaluation board demonstrates ultra-high efficiency peaking at over 99%. It also provides >98.5% efficiency over a wide range of load with minimal power losses distributed among SMD MOSFETs. This enables operation at maximum load without heatsinking or the need for forced air cooling. The multi-level inverter is based on 150V OptiMOS™ 5 technology, which has low RDS(on) and Qrr. This hybrid enables reduction in size and weight for solar inverters, string inverters and general purpose inverters.The EVAL_4kVA_230VAC_5LINV evaluation board supports a nominal 400VDC input voltage with operating range from 380V to 420V. The nominal output voltage is a 230VRMS, 60Hz pure sine wave. The maximum output continuous power of 4.0kVA. The inverter start-up time to reach the nominal output voltage during full-load condition is less than 500ms. An overload of 50 percent can be safely sustained for 10 seconds.

Eigenschaften

  • Innovative 5-level hybrid inverter topology
  • No heat sinking
  • No forced air cooling
  • XMC™ microcontroller based

Typische Anwendungen

  • Inverters, Solar inverters, Solar string inverters

Weiterführende Informationen

Artikeldaten

Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieCTol. CVR
(V (DC))
BauformBetriebstemperaturQ
(%)
RISOKeramiktypL
(mm)
W
(mm)
H
(mm)
Fl
(mm)
Verpackung Muster
885012006003SPEC
8 Dateien WCAP-CSGP MLCCs 10 V(DC)15 pF ±5% 10 0603 -55 °C up to +125 °C 70010 GΩ NP0 Klasse I 1.6 0.8 0.8 0.4 7" Tape & Reel
Artikel Nr. Daten­blatt Simu­lation
885012006003SPEC
Muster
Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieCTol. CVR
(V (DC))
BauformBetriebstemperaturQ
(%)
RISOKeramiktypL
(mm)
W
(mm)
H
(mm)
Fl
(mm)
Verpackung Muster