IC-Hersteller AnDAPT Inc

IC-Hersteller (103)

AnDAPT Inc AmP8DB6QF65 | Demoboard ARD_X_AUP_A1

Xilinx Artix UltraScale+ Cost-optimized Minimum Rails FPGA PMIC

Details

TopologieAbwärtswandler
Eingangsspannung12 V
Ausgang 11.8 V / 1.6 A

Beschreibung

The ARD_X_AUP_A1 is a scalable power supply designed to provide power to Xilinx Artix UltraScale+ Cost-optimized FPGA devices using minimum number of power rails. The designs are scalable to support the cost- and power-optimized FPGA devices including AU10P, AU15P, AU20P, and AU25P.

Eigenschaften

  • Design supplies all 10 voltage rails (Figure 1) to Xilinx Artix UltraScale+ FPGA using one AnDAPT PMIC (Table 1) containing-
  • Four async buck switchers (C150) of 6 A capacity each
  • Two LDOs (C710) of 2 A capacity each
  • Two load switches (C750) of 6 A capacity each
  • Inbuilt sequencer (C420) meeting Xilinx turn-on and turnoff timing requirements
  • Soft start/shut-down
  • Only one input of 12 V (±10%) required
  • Adjustable output voltage with down to 2.4 mV resolution
  • 1% voltage accuracy
  • Efficiency up to 90%
  • QFN 5x5 sq. mm package
  • Protections:Input Undervoltage Lockout (ViUVLO), Output Under voltage Lockout (VoUVLO), Overcurrent Protection (OCP), Output Overvoltage Protection (OVP), Overtemperature Protection (OTP), Short-circuit Protection (SCP)
  • Easy to change any voltage, currents or sequencing (if required) including enable/disable rails using web-basedWebAmp R.D software

Typische Anwendungen

  • Industrial IoT/Factory automation
  • Secure networking
  • Machine vision/Image processing, 4k broadcast/Video processing

Weiterführende Informationen

Artikeldaten

Artikel Nr.
Daten­blatt
Simu­lation
Downloads
Status
Produktserie
C
Tol. C
VR(V (DC))
Bauform
Betriebstemperatur
DF(%)
RISO
Keramiktyp
L(mm)
B(mm)
H(mm)
Fl(mm)
Verpackung
L(µH)
IRP,40K(A)
ISAT,10%(A)
ISAT,30%(A)
RDC(mΩ)
fres(MHz)
Material
Muster
WCAP-CSGP MLCCs 25 V(DC), 100 nF, ±20%
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität100 nF
Kapazität±20% 
Nennspannung25 V (DC)
Bauform0402 
Betriebstemperatur -55 °C up to +85 °C
Verlustfaktor10 %
Isolationswiderstand5 GΩ
KeramiktypX5R Klasse II 
Länge1 mm
Breite0.5 mm
Höhe0.5 mm
Pad Dimension0.25 mm
Verpackung7" Tape & Reel 
WCAP-CSGP MLCCs 25 V(DC), 10 µF, ±20%
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Kapazität10 µF
Kapazität±20% 
Nennspannung25 V (DC)
Bauform1206 
Betriebstemperatur -55 °C up to +85 °C
Verlustfaktor10 %
Isolationswiderstand0.01 GΩ
KeramiktypX5R Klasse II 
Länge3.2 mm
Breite1.6 mm
Höhe1.6 mm
Pad Dimension0.6 mm
Verpackung7" Tape & Reel 
WE-HCI SMT-Hochstrominduktivität, –, –
Simu­lation
Status Aktivi| Produktion ist aktiv. Erwartete Lebenszeit: >10 Jahre.
Bauform7040 
Betriebstemperatur -40 °C up to +150 °C
Länge7 mm
Breite6.9 mm
Höhe3.8 mm
Induktivität2.2 µH
Performance Nennstrom10.2 A
Sättigungsstrom 15.6 A
Sättigungsstrom @ 30%13 A
Gleichstromwiderstand11.4 mΩ
Eigenresonanzfrequenz52 MHz
MaterialSuperflux