Analog Devices MAX38800 | Demoboard MAX38800 Evaluation Kit

Beschreibung

The MAX38800 evaluation kit (EV kit) serves as a reference platform for evaluating the MAX38800 voltage regulator IC. This single-chip, integrated switching regulator provides an extremely compact, highly efficient, fast, accurate and reliable power delivery solution for low-output voltage applications. The MAX38800 has different programmability options to enable a wide range of configurations. The EV kit consists of a fully-assembled and tested Printed Circuit Board (PCB) implementation of the MAX38800. Jumpers, test points, and input/output connectors are included for flexibility and ease-of-use. Refer to the data sheet for ordering information and more details.

Eigenschaften

• High-Efficiency Solution
  • Up to 96% Peak
  • Up to 95.5% Full-Load
  • Up to 94% Light-Load Efficiency at 1A withDCM Enabled
• Inductor valley current limit is Configured to 7.5A (R_SEL = R1 = 2.67kΩ)
• Programmable Switching Frequency from 400kHz to 900kHz
• Programmable Positive and Negative OCP Limit
• Programmable Reference Voltage with ExternalInput Option
• Fast Transient Response with Quick PWM™Architecture
• Differential Remote Sense with Open-CircuitDetection
• Percentage-Based Output Power Good and OVP
• Open-Drain Status Indicator (STAT) Pin
• Input Undervoltage and Overvoltage Lockout
• Adaptive Dead Time Control
• Integrated Boost Switch
• 19-Bump WLCSP (2.2mm x 2.8mm) Footprint
• Operation Using Ceramic Input and Output

Typische Anwendungen

• Servers/μServers
• I/O and Chipset Supplies / GPU Core Supply / DDR Memory—VDDQ and VTT / Point-of-Load (PoL) Applications

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers