Analog Devices LT3799-1

Beschreibung

The LT®3799-1 is an isolated flyback controller with power factor correction specifically designed for driving LEDs. The controller operates using critical conduction mode allowing the use of a small transformer. Using a novelcurrent sensing scheme, the controller is able to deliver a well regulated current to the secondary side without using an opto-coupler. A strong gate driver is included to drive an external high voltage MOSFET. Utilizing an onboard multiplier, the LT3799-1 typically achieves power factors of 0.97. TheFAULT pin provides notification of open and short LED conditions. The LT3799-1 offers improved line regulation over the LT3799, but is not designed for use with a TRIAC dimmer.The LT3799-1 uses a micropower hysteretic start-up to efficiently operate at offline input voltages, with a third winding to provide power to the part. An internal LDO provides a well regulated supply for the part’s internal circuitry and gate driver.

Eigenschaften

• Isolated PFC LED Driver with Minimum Number of External Components.
• VIN and VOUT Limited Only by External Components.
• Active Power Factor Correction (Typical PFC > 0.97)
• Low Harmonic Content
• No Opto-Coupler Required
• Accurate Regulated LED Current (±5% Typical)
• Open LED and Shorted LED Protection
• Thermally Enhanced 16-Lead MSOP Package.

Typische Anwendungen

• Offline 4W to 100W+ LED Applications
• High DC VIN LED Applications

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers