Analog Devices ADM3050E | Demoboard ADM3050EEBZ

Beschreibung

The EVAL-ADM3050EEBZ allows the user to evaluate the ADM3050E isolated signal and power transceiver for controller area network (CAN) or CAN with flexible data rate (CAN FD) networks. The EVAL-ADM3050EEBZ allows all of the input and output functions to work without the need for external components. Based on the Analog Devices, Inc., iCoupler® technology, the ADM3050E integrates logic side on-off keying (OOK) signal isolation channels and an Analog Devices isoPower® dc-to-dc converter to provide regulated, isolated power that is well below EN 55022 Class B limits when transmitting on a 2-layer printed circuit board (PCB) with ferrites. The EVAL-ADM3050EEBZ comes populated with the ADM3050E. Full specifications of the ADM3050E can be found in the ADM3050E data sheet, available from Analog Devices and must be consulted in conjunction with this user guide when using the EVAL-ADM3050EEBZ.

Eigenschaften

• ADM3050E 12 Mbps isolated CAN FD transceiver
• 2-layer PCB with low radiated emissions, passes EN 55022 Class B
• On-board LDOs for 6 V to 9 V supply, providing 5 V to the ADM3050E VDD1 pin and VDD2 pin
• Screw terminal connectors for the following:
• 6 V to 9 V LDO, 5 V power supply to the VDD1 pin
• 1.8 V to 5.0 V direct power supply to VDD1 pin
• 6 V to 9 V LDO, 5 V power supply to the VDD2 pin
• 5 V direct power supply to VDD2 pin
• TXD pin, RXD pin, CANH pin, CANL pin signals
• Divided PCB return planes for GND1 and GND2
• SMA connectors for TXD pin and RXD pin signals

Typische Anwendungen

• CAN Bus for Industrial and Automation

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers