Analog Devices LTC6804-2, LTC3300-1(x2) | Demoboard DC2100B-D | IC-Referenzdesignsuche von Würth Elektronik

Details

Topologie	Sperrwandler
IC-Revision	1

Beschreibung

Demonstration Circuit DC2100A is a Bi-Directional Cell Balancer using two LTC®3300-1 ICs to achieve active balancing of up to 12 Li-Ion cells. The board uses a single LTC6804-2 Multi-Cell Addressable Battery Stack Monitor IC to measure cell voltages and two LTC3300-1 ICs to provide active cell balancing. The DC2100A-C contains a PIC18F47J53 microcontroller to communicate with the LTC3300-1 and LTC6804-2 ICs, as well as an LTC6820 isoSPI Interface IC for communication with DC2100A-D boards. Up to 7 DC2100A-D boards can be connected to a DC2100A-C to build a stacked system of 8 total boards.A graphical user interface (GUI) uses a USB interface to communicate with the DC2100A-C. The GUI controls the LTC3300-1 ICs allowing manual control of the charging/discharging of cells and reporting the voltage of each cell. Cell balancing is achieved through the LTC3300-1 ICs by transferring charge from one or more cells per LTC3300-1 to the stack or from the stack to one or more cells per LTC3300-1.

Weiterführende Informationen

Artikeldaten

Artikel Nr.	Datenblatt	Simulation	Downloads	Produktserie	xPxC	Anwendungssystem	V_in	V_Out1 (V)	I_Out1 (mA)	L (µH)	n	I_{R 1} (A)	I_SAT (A)	L_S (µH)	V_T (V)	Bauform	IC-Referenz	H (mm)	Betätigungskraft (Value) (g)	Elektrische Lebensdauer (Cycles)	Actuator-Farbe	Dampfphasenprozess	Pins	Reihen	Gender	Typ	I_R (A)	Verpackung	Raster (mm)	Montageart	L (mm)	Arbeitsspannung (V (AC))	Kontaktwiderstand (mΩ)	Tol. R
615008140121	SPEC	–	6 Dateien EDA-Modelle: Bauteile ZIP ALT Altium_WR-MJ (rev23a).IntLib \| 18.3 MB CDS Cadence_WR-MJ (rev23c).zip \| 83.4 MB EAG Eagle_WR-MJ (rev23b).lbr \| 509 KB CAD-Dateien ZIP 3D 3D_615008140121 (rev1).pdf \| 542.9 KB IGS Download_IGS_615008140121 (rev1).pdf \| 557.1 KB STP Download_STP_615008140121 (rev1).stp \| 962.5 KB	WR-MJ Modular Jack Horizontal Shielded Front Grounding Post 8P8C Tab Down	8P8C	CAT 3	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	Horizontal	1.5	Tray	–	THT	–	120	20	max.
434111025826	SPEC	–	5 Dateien EDA-Modelle: Bauteile ZIP ALT Altium_WS-TASV (rev24a).IntLib \| 2 MB CDS Cadence_WS-TASV (rev23a).zip \| 12.5 MB EAG Eagle_WS-TASV (rev23a).lbr \| 408.8 KB CAD-Dateien ZIP IGS 434111025826 (rev1).igs \| 844 KB STP 434111025826 (rev1).stp \| 246.6 KB Alle 5 Dateien als ZIP herunterladen ZIP	WS-TASV SMT Tact Switch 6.0x3.8 mm	–	–	–	–	–	–	–	–	–	–	–	–	–	2.5	260	30000	Weiß	nicht spezifiziert	–	–	–	–	0.05	Tape and Reel	–	–	–	–	–	–
750312504	SPEC		9 Dateien EDA-Modelle: Bauteile ZIP ALT Altium_WE-FLYLT (rev22a).IntLib \| 1.2 MB CDS Cadence_WE-FLYLT (rev22a).zip \| 4.7 MB EAG Eagle_WE-FLYLT (rev22a).lbr \| 252.5 KB CAD-Dateien ZIP 3D 3D_070-2381_MP3-8 (rev1).PDF \| 121.1 KB IGS Download_IGS_070-2381_MP3-8 (rev1).IGS \| 1.8 MB STP Download_STP_070-2381_MP3-8 (rev1).STEP \| 880.9 KB Elektrische Modelle ZIP LT LTSpice_WE-FLYLT (rev22b).zip \| 30 KB PSP PSpice_WE-FLYLT (rev22b).zip \| 15.8 KB Sonstige ZIP WRL Download_WRL_070-2381_MP3-8 (rev1).WRL \| 106.4 KB Alle 9 Dateien als ZIP herunterladen ZIP	WE-FLYLT Flyback Transformers for Linear Technology	–	–	2 - 5.5 V (DC)	20	250	3.46	1:1	–	10.2	0.12	500	EP13	LTC3300	12.7	–	–	–	–	–	–	–	–	–	Tape and Reel	–	SMT	13.46	–	–	–
60800213421	SPEC	–	3 Dateien CAD-Dateien ZIP 3D 3D_60800213421 (rev1).pdf \| 65.8 KB IGS Downloads_IGES_60800213421 (rev1).iges \| 778 KB STP 60800213421 (rev1).stp \| 286.2 KB Alle 3 Dateien als ZIP herunterladen ZIP	WR-PHD 2.00 mm Jumper with Test Point	–	–	–	–	–	–	–	1	–	–	–	–	–	–	–	–	–	–	2	–	Jumper	–	3	Beutel	2	–	–	200	30	max.
62000311121	SPEC	–	6 Dateien EDA-Modelle: Bauteile ZIP ALT Altium_WR-PHD (rev24a).IntLib \| 34.1 MB CDS Cadence_WR-PHD (rev24c).zip \| 63.9 MB EAG Eagle_WR-PHD (rev24b).lbr \| 5.2 MB CAD-Dateien ZIP 3D 3D_62000311121 (rev1).pdf \| 24.7 KB IGS Download_IGES_62000311121 (rev1).iges \| 303.4 KB STP Download_STP_62000311121 (rev1).stp \| 74.1 KB	WR-PHD 2.00 mm THT Pin Header	–	–	–	–	–	–	–	2	–	–	–	–	–	–	–	–	–	–	3	Single	Pin Header	Gerade	2	Beutel	2	THT	6	200	20	max.
62000621121	SPEC	–	6 Dateien EDA-Modelle: Bauteile ZIP ALT Altium_WR-PHD (rev24a).IntLib \| 34.1 MB CDS Cadence_WR-PHD (rev24c).zip \| 63.9 MB EAG Eagle_WR-PHD (rev24b).lbr \| 5.2 MB CAD-Dateien ZIP 3D 62000621121_1 (rev1).pdf \| 41.3 KB IGS 62000621121 (rev1).iges \| 599 KB STP 62000621121 (rev1).stp \| 143.5 KB	WR-PHD 2.00 mm THT Dual Pin Header	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	–	6	Dual	Pin Header	Gerade	2	Beutel	2	THT	6	200	20	max.
62501621621	SPEC	–	6 Dateien EDA-Modelle: Bauteile ZIP ALT Altium_WR-BHD (rev23a).IntLib \| 18.7 MB CDS Cadence_WR-BHD (rev23a).zip \| 19 MB EAG Eagle_WR-BHD (rev23a).lbr \| 2.5 MB CAD-Dateien ZIP 3D 62501621621_1 (rev1).pdf \| 70.3 KB IGS 62501621621 (rev1).iges \| 1.1 MB STP 62501621621 (rev1).stp \| 267.7 KB Alle 6 Dateien als ZIP herunterladen ZIP	WR-BHD 2.00 mm Male Box Header	–	–	–	–	–	–	–	2	–	–	–	–	–	–	–	–	–	–	16	–	Männlich	Gerade	2	Tray	2	THT	23.2	250	20	max.