en

Cart

Your cart is empty.

IC reference design search

MaxLinear SP338 | Demoboard SP338EER1-0A-EB

SP338/SP339 EVALUATION BOARD USER’S MANUAL

Overview

TopologyOther Topology
IC revision1.0.0

Description

This user’s manual is for the SP338/SP339 evaluation board. The SP338 and SP339 are pin compatible devices and are both offered in the 40-pin QFN package. The primary difference is that the SP339 only has 4modes of operation (2 mode control pins) while the SP338 has 8 modes of operation (3 mode control pins).Table 1 shows the different devices and packages that this evaluation board supports, and the corresponding ordering part numbers for each.In addition to the SP338/SP339, there is an Exar XR21B1411 1-ch USB UART on this evaluation board. When shipped from the factory, the SW3 and SW4 switches are off. Therefore, the SP338/SP339 is isolated fromboth the XR21B1411 and the DB9 connector. To enable the connections between the XR21B1411 and the SP338/SP339, place all switches on SW3 in the ON position. To enable the connections between the SP338/ SP339 and the DB9 connector, place all switches on SW4 to the ON position. All SP338/SP339 signals are accessible from the test points on the board. The test points are shown in each figure showing the modes.

Products

Order Code Data­sheet Downloads Product seriesApplicationInterface TypeTypeGenderPinsMountWorking Voltage
(V (AC))
Packaging Samples
61400416121
STE 3D ALT EAG IGS CADWR-COM USB 2.0 Horizontal THT USB 2.0 Type B Horizontal Female 4 THT 30 Tray
Order Code Data­sheet
61400416121
Samples
Order Code Data­sheet Downloads Product seriesApplicationInterface TypeTypeGenderPinsMountWorking Voltage
(V (AC))
Packaging Samples