de

Warenkorb

Ihr Warenkorb ist leer.

IC-Referenzdesignsuche
IC-Hersteller Infineon Technologies

Infineon Technologies TDA4863G

Boost Controller TDA4863-2/TDA4863-2G Power-Factor Controller (PFC)IC for High Power Factor and Low THD

Details

TopologieSonstige Topologie
IC-Revision2

Beschreibung

The TDA4863-2 IC controls a boost converter in a way that sinusoidal current is taken from the single phase line supply and stabilized DC voltage is available at the output.This active harmonic filter limits the harmonic currents resulting from the capacitor pulsed charge currents during rectification. The power factor which decibels the ratio between active and apparent power is almost one. Line voltage fluctuations can be compensated very efficiently.

Eigenschaften

  • IC for sinusoidal line-current consumption
  • Power factor achieves nearly 1
  • Controls boost converter as active harmonicfilter for low THD
  • Start up with low current consumption
  • Zero current detector for discontinuousoperation mode
  • Output overvoltage protection
  • Output undervoltage lockout
  • Internal start up timer
  • Totem pole output with active shut down
  • Internal leading edge blanking LEB
  • Pb-free lead plating ; RoHS compliant

Remarks:L2=2*6.8mH,L3=0.4mH refer page no.21 in http://www.infineon.com/dgdl/AN_TDA4863G-2.pdf?fileId=db3a304412b407950112b41806e624b4

Weiterführende Informationen

Artikeldaten

Artikel Nr. Daten­blatt Downloads ProduktserieVinVOut1
(V)
IOut1
(A)
Vaux
(V)
fswitch
(kHz)
L1
(mH)
NPRI : NSEC : NAUXVT
(V (AC))
L
(mm)
W
(mm)
H
(mm)
Montageart Muster
750845240SPEC
1 Dateien MID-OLIFX Offline Flyback Transformers for Infineon Technologies 195 - 265 V (AC) 24 2 15 47 2.6 17.778:1.555:1.555:1 3600 31.5 35.2 24 THT
Artikel Nr. Daten­blatt
750845240SPEC
Muster
Artikel Nr. Daten­blatt Downloads ProduktserieVinVOut1
(V)
IOut1
(A)
Vaux
(V)
fswitch
(kHz)
L1
(mH)
NPRI : NSEC : NAUXVT
(V (AC))
L
(mm)
W
(mm)
H
(mm)
Montageart Muster