IC-Hersteller AnDAPT Inc

IC-Hersteller (96)

AnDAPT Inc AnD7220 | Demoboard AnD7220EB

DrMOS Controller & Dual Sync Buck PMIC

Details

TopologieAbwärtswandler
Eingangsspannung12 V
Ausgang 10.7 V / 10 A

Beschreibung

The AnD7200 Adaptable PMIC uses AnDAPT AmP™ advanced technology consisting of fully flexible digital fabric embedded with high performance analog blocks. The AnD7200consists of one configurable DrMOS controller, two 10A high current synchronous Buck regulators along with an integrated sequencer and four additional auxiliary LDOs. The AnD7200is fully tested and ready for use in designs. The AnD7200Buck regulators use voltage-mode control. The user can modify output voltages and rail sequencing using external resistors or WebAdapterTM online tool. The sequencer can be programmed based on either timed delays or Power Good (PGOOD) signals. Adaptable PMICs provide fastest prototyping and time-to-market, while providing best-in-class performance and flexibility. The Adaptable PMIC is optimized to power high-end processors by integrating multiple power rails into single-chip designs.

Eigenschaften

  • Demonstrates AnD7220 or AnD7202 Adaptable PMIC:
  • One DrMOS Buck Regulator
  • One 10A Synchronous Buck Regulator
  • One 6A Synchronous Buck Regulator
  • Two LDOs (AnD7220) or two Load Switches (AnD7202)
  • Four 0.2A auxiliary LDOs: 1.2V, 1.8V, 2.5V, 3.3V
  • Sequencing
  • WebAdapter™ or WebAmP™ Tool Downloads Configuration Files:
  • .HAX file to configure the device directly
  • .HEX file (Intel HEX) to program on-board flash

Typische Anwendungen

  • On-demand power management, multi-rail power integration / Powering server, processor, memory, storage, network switcher and router platforms / Powering FPGA, processor, SSD, subsystem power control& sequencing

Weiterführende Informationen

Artikeldaten

Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieλDom typ.
(nm)
FarbeλPeak typ.
(nm)
IV typ.
(mcd)
VF typ.
(V)
Chiptechnologie50% typ.
(°)
MontageartIR 1
(A)
Arbeitsspannung
(V (DC))
CTol. CVR
(V (DC))
BauformBetriebstemperaturDF
(%)
RISOKeramiktypL
(mm)
W
(mm)
Fl
(mm)
L
(µH)
IRP,40K
(A)
ISAT1
(A)
ISAT,30%
(A)
RDC
(mΩ)
fres
(MHz)
MaterialLR
(µH)
Endurance
(h)
BetriebstemperaturIRIPPLE
(mA)
Z
(mΩ)
ILeak
(µA)
Ø D
(mm)
PinsReihenH
(mm)
GenderTypIR
(A)
Verpackung Muster
150060GS75000SPEC
25 Dateien WL-SMCW SMT Mono-color Chip LED Waterclear 525 Grün 515 430 3.2 InGaN 140 SMT 0603 -40 °C up to +85 °C 1.6 0.8 -40 °C up to +85 °C 0.7 Tape and Reel
150060RS75000SPEC
25 Dateien WL-SMCW SMT Mono-color Chip LED Waterclear 625 Rot 630 250 2 AlInGaP 140 SMT 0603 -40 °C up to +85 °C 1.6 0.8 -40 °C up to +85 °C 0.7 Tape and Reel
744314110SPEC
8 Dateien WE-HCI SMT-Hochstrominduktivität SMT 7050 -40 °C up to +150 °C 7 6.9 1.1 19.6 6 13 3.15 135 Superflux 0.78 -40 °C bis zu +150 °C 2 4.8
744325072SPEC
8 Dateien WE-HCI SMT-Hochstrominduktivität SMT 1050 -40 °C up to +150 °C 10.5 10.2 0.72 37.8 14 35 1.3 115 Superflux 0.6 -40 °C bis zu +150 °C 2 4.7
744301025SPEC
8 Dateien WE-HCM SMT-Hochstrominduktivität 1190 -40 °C up to +125 °C 11.3 11 0.25 56 54.4 64.7 0.32 MnZn 0.25 8.9 38
865080553014SPEC
8 Dateien WCAP-ASLI Aluminium-Elektrolytkondensatoren V-Chip SMT220 µF ±20% 35 8.0 x 10.5 -55 °C up to +105 °C 140.454545 MΩ 10.5 8.3 2000 -55 °C bis zu +105 °C 570 210 77 8 15" Tape & Reel
885012206095SPEC
8 Dateien WCAP-CSGP MLCCs 50 V(DC)100 nF ±10% 50 0603 -55 °C up to +125 °C 35 GΩ X7R Klasse II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012106019SPEC
8 Dateien WCAP-CSGP MLCCs 25 V(DC)220 nF ±20% 25 0603 -55 °C up to +85 °C 3.52.3 GΩ X5R Klasse II 1.6 0.8 0.4 0.8 7" Tape & Reel
885012207098SPEC
8 Dateien WCAP-CSGP MLCCs 50 V(DC)100 nF ±10% 50 0805 -55 °C up to +125 °C 2.55 GΩ X7R Klasse II 2 1.25 0.5 0.8 7" Tape & Reel
885012107006SPEC
8 Dateien WCAP-CSGP MLCCs 6.3 V(DC)47 µF ±20% 6.3 0805 -55 °C up to +85 °C 100.002 GΩ X5R Klasse II 2 1.25 0.5 1.25 7" Tape & Reel
694108106102SPEC
6 Dateien WR-DC DC Power Jack Right Angled SMT Ø 6.4 with 4 soldering pads & pegs SMT 5 24 -40 °C up to +85 °C100 MΩ -40 °C bis zu +85 °C Right Angled 5 Tape and Reel
61300211121SPEC
6 Dateien WR-PHD 2.54 mm THT Pin Header THT 250 -40 °C up to +105 °C1000 MΩ 5.08 2 Single Pin Header Gerade 3 Beutel
61300311121SPEC
6 Dateien WR-PHD 2.54 mm THT Pin Header THT 250 -40 °C up to +105 °C1000 MΩ 7.62 3 Single Pin Header Gerade 3 Beutel
61300421121SPEC
6 Dateien WR-PHD 2.54 mm THT Dual Pin Header THT 250 -40 °C up to +105 °C1000 MΩ 5.08 4 Dual Pin Header Gerade 3 Beutel
Muster
Artikel Nr. Daten­blatt Simu­lation Downloads ProduktserieλDom typ.
(nm)
FarbeλPeak typ.
(nm)
IV typ.
(mcd)
VF typ.
(V)
Chiptechnologie50% typ.
(°)
MontageartIR 1
(A)
Arbeitsspannung
(V (DC))
CTol. CVR
(V (DC))
BauformBetriebstemperaturDF
(%)
RISOKeramiktypL
(mm)
W
(mm)
Fl
(mm)
L
(µH)
IRP,40K
(A)
ISAT1
(A)
ISAT,30%
(A)
RDC
(mΩ)
fres
(MHz)
MaterialLR
(µH)
Endurance
(h)
BetriebstemperaturIRIPPLE
(mA)
Z
(mΩ)
ILeak
(µA)
Ø D
(mm)
PinsReihenH
(mm)
GenderTypIR
(A)
Verpackung Muster