Renesas P9025AC | Demoboard P9025AC-R-EVK

Beschreibung

The P9025AC-R-EVK is a turnkey 5 Watt, Qi-compliant wireless power receiver reference kit for fast prototyping and design integration. The kit consists of an easy-to-use reference board and comprehensive support collateral that significantly eases design-in effort and minimizes time-to-market. An associated layout module enables direct instantiation on to a system board, while an optimized and fully-tested Bill-of-Materials (BOM) takes the guess-work out of component selection. Foreign Object Detection (FOD) tuning is supported via selectable pre-programmed curve settings and technical documentation. The P9025AC-based solution is well-suited for a wide range of applications, including PC peripherals, furniture, medical devices, and other portable devices still hindered by traditional contact-based charging bases or cables.

Eigenschaften

• Integrated Single Chip Receiver (Rx) Solution
• Integrated Full-Bridge Synchronous Rectifier
• Integrated 5.3V, 1A LDO Regulator Output
• WPC-1.1.2 compliant
• Advanced WPC v1.1.2 Foreign Object Detection (FOD)
• Programmable FOD setting via external resistor
• Closed-loop power transfer control between Tx and Rx
• Support I2C interface with access to:
• Rectifier voltage
• Output current
• Resonance frequency
• Open-Drain LED Indicator Output
• Over-Temperature/Voltage/Current Protection
• 0° to +85°C temperature range
• 5 x 5 mm 32-VFQFPN package

Typische Anwendungen

• Rugged electronic gear,Small appliances
• Battery-powered electronics
• PC peripherals

Weiterführende Informationen

• Datenblatt
• Produktseite des IC-Herstellers